Recent content by schlimmerkerl

I will buy one right away. Many thanks.

I'll try to contact I-R again. Thank you.

I purchased their 200G sprayer. Typically for Ingersoll-Rand tools, It came with a lot of information—except how to set up and use the tool. Mainly, there is a male fitting at the bottom of the handle. I assume an air hose attaches there. If so, what kind, size, etc. Thanks very much.

Mostly to make custom acrylic letters. Suggested companies should be professional, reliable, cost-effective, and with reasonable turnaround and delivery. We would prefer not to do business in China. Thank you.

I think it's closer to Haettenschweiler or Impact. In any case, it's been altered. You'll need to convert the type to outlines, add a stroke, "squish" it in a bit (side-to-side), and shear (all in.ai). Here's quick version…

You may have solved the problem, but… our experience has been that a newly-painted surface should cure for at least two weeks—preferably one month (depending upon climate). You may want to try priming with Stix primer, let it set for the recommended time, recoat with (as mentioned below) a...

New or gently used. I'll pick up anything <100 miles from Greenwich, Connecticut. Otherwise, include shipping. Thanks.

Thank you

Any suggestions? Is there a recommended cold-lamination machine (Xylon?) that may be used to apply application tape to cut/weeded vinyl? Thanks.

I considered aluminum, but think it would be hard to cut for the mortise for the horizontal piece. Also the client doesn't want to see the kinds of fasteners that would secure that piece externally.

Looking for a resource for a post, 4" x 4" x (at least) 12 feet. It will be set 2' in concrete footing. Must be weatherproof, non-warping, paintable, and machineable. Must be able to accept a through-mortise "paddle" approx. 50" x 1.5" (thickness) x 6". Wood? If so, what variety? We'll be...

For an indoor installation, if the exact color we are looking for is not available, what is a recommended paint? There are actually many good colors available as "art" (that is, graffiti) colors in art supply stores, but I'd have to test for good adhesion, durability, etc. Acrylics? I think my...

Heat gun Yes, I think I'll practice a bit first…

Can anyone recommend a product to remove squeegee marks from large areas of installed gloss black vinyl (Oracal 651), and yes, I should have used a felt squeegee)? The substrate is smooth Sintra. I did not notice this problem with the other colors on the same piece. Thanks very much.

@TimToad and Billct2. Yes, famous for over thinking, usually at 3 a.m. Anyway, thanks very much for the very good solutions, drawings, etc. which I'll definitely try next time out— though I will prime the heck out of that MDO.