Search results

If it is a Edge LE or Edge 2 it sounds like the Z axis flag is bent and is out of the sensor. . If is is a Edge FX, they need the lube the Z axis worm screw with Lubiplate DS-ES. I would call TechSupport as they can better determine what it is, I'm just guessing.

GB2 what were you running before you upgraded? GA or Omega 2.1 ? If you ever saved a spool file (*.spl) with the older software and you still have it could you email it to me to look at. Sounds like you have an early Envision 375.

signs101, 4edgetalk, uksignboards (letterville but can no longer login) pandora drudgereport espn comcast (email) a bunch of political sites

If anyone is using Gerber software you can only interface to the Sabre via GQMgr, so with that said I would first check the cable. Off the top of my head I do not know the "pin out" of the cable. With Sabres grounding between the Sabre and computer can be a problem also. For more info it would...

You can watch Dana do his magic in Omega 3.0 with this vid. He started with a 2 side template. http://screencast.com/t/ZDBlY2FhOWMt Remember to reverse your BACK decal text if you do change the text. When you change text It will flip back to its non-flipped state. He designed with...

Fred thank you for your time to explain and Peewee for asking, we at Gerber appreciate it.

The Gerber Software CD/DVD is NOT tied to the S/N or any other info on the dongle. If the dongle is programmer correctly and is not damaged (internally) then you should be able to install the proper software. The dongle is used to make sure you are not executing the software w/o it (but there...

No, your a pin striper

Check out http://compreviews.about.com/gi/o.htm?zi=1/XJ&zTi=1&sdn=compreviews&cdn=compute&tm=121&f=10&su=p549.8.208.ip_p284.9.336.ip_p504.1.336.ip_&tt=2&bt=0&bts=0&zu=http%3A//support.microsoft.com/kb/929605

Those are BIG inches. The reason I say all of this is that the AutoCarve module is old 16 bit code and has limits on a lot of variables. If you have any future problems let me know.

Missed the first question, In Corel or AI insure that the lower left of the design is (0,0) that should be fine. No advantage bringing it into Omega (Composer) unless you want to do some editting (node) or see how "clean" the data is (via detail edit). Current Omega version are far superior in...

May I ask why you are regenerating the tool paths. Are you changing parameters? Once a tool path is generated (created) there is no need to recreate each time you want to output. Once your job is setup and all the tool paths are generated you can just save the file (RTP) and when you want...

The TrueType fonts are found on the Omega Font CD / Omega DVD in the TrueType folder. These does not seem to be a catalog for the TTF fonts.

Malkin, what version of Omega? As a Type 1 font does it show up in the "small text" font listbox ?

There are TrueType fonts on the Gerber Font CD and Omega 3.0 DVD. FontManager (via GspTray) will only manage Gerber Fonts. For the TTF fonts you need to view with Windows explorer. I also think in the folder (I do not have a CD/DVD) here at home that there is a PDF of the fonts. I would not say...

No, when I say close to (0,0) I mean the original design. In your case where you had it placed in Composer. A lot of people when they design a job have no reference they just design it in "space". The lower left of the job may be out at (30, 25) Your not regenerating the tool paths every...

The AutoCarve module is very sensitive to "dirty" data. Meaning lots of points, weird bezier curves, etc. The data is also position sensitive. many people when designing their job do not design it about the (0,0) position thus the X/Y data points are very large and cause problems. I've wanted...

Thanks for the update.

I get emails all the time from www.DigitalPrintMarket.com

There should be a document in the Upgrade explaining that you need to check the Rev level of your Sabre Firmware and upgrade it accordingly. On the Omega 3.0 DVD there should be a folder with firmware info on it and firmware itself. They should be able to access the Firmware Folder on the...