Search results

Thank you will try it for him...

I am asking this question on behalf of my screenprinter who purchased a Mimaki jv100. He wanted the same printer as mine (jv150-130) but they have been discontinued or so they told him. So now he has this printer that Flexi only has 1 profile for. The machine has 2 heads and prints fast and...

To curb the frustration I'll try google advanced search to look for pdf's 9 times outta 10 the logo is in vector format on one of those pdf's I do this also and it's such a relief when you find a good pdf file

It happens so rarely but only on bigger jobs naturally... I Don't keep too many old print files in the que...Just what is cureent until they are cut. It could be that free c cleaner or the superantispyware as they seem very invasive. Going to shut them down from now on...Thank you Fairly new...

I have no idea why the printer just stops printing...Flexi production manager seems locked at 64% print and the printer screen is just sitting with no errors. I have no idea why this happens and can't seem to get either the printer or the software to continue printing. A Glitch?

Well here is the opposite... Get a call from a customer to set up some graphics to be engraved... He approves and I send his engraver an eps file. I get a call from my client telling me he can't open the file. I ask to speak to him and I ask him what software he engraves from...he says Corel...

I always thought they removed the wraps ( on trailers anyhow) with high pressure washers?

How about cutting some small squares with the registration square knocked out of the larger square and place over the reg marks to cancel out the holographic affect

I am up and running again... When I purchased the laminator it came with a bag of replacable fuses. I replaced all 3 and still nothing. There was another bag that had these 2 small brown cylindrical gizmos that looked like diodes or transistors and I had no clue what they were for, but...

Did that, checked if there was any power going to the unit and there is. I found the fuses but can't tell if they are blown as they have that white covering as to being clear. I will replace both and keep my fingers crossed

My Seal 54 laminator won't turn on this morning..I have checked the electrical and all is good. I have a package with replacement fuses, but heck if I can find where they hide them on the main board. Anyone ever experience this?

...and something has changed with that retractable banner material, no doubt out of China.... I have had numerous prints that are not drying fast enough before they start to roll up and I have toasted in one batch 7, so now I have to print them one at a time and get them off the roll asap plus...

Flexi only has one profile for that printer

I'm pretty sure distilled water was recommended by Gerber.

So I am a beginner? Why the hate?

With the Edge they said you used distilled water to clean media

Might also want to look closely at the media. I found that some materials had very small craters that would not let the edge drop the foil properly in spots.

You can print black on black using the Gerber Edge, which I have done over the years. Of course size is the biggest issue, but you don't need to laminate

I'm pretty sure that Rasterlink only supports Mimaki plotters, which in itself has to be a complete marketing failure by Mimaki.

I regularly delete all the old printed and cut jobs, but have not actually done anything as far as windows goes. Will give it a try.