Search results

Hello....I am authorized Epson, I can get parts for you

You may want to unplug it and remove the top right cover to access the lever, youwill need to remove the screws on the handles and the control panel as well as a few screws on the top cover.....maybe the small think plate on the right as well

you can find it on ebay

I find that users often are not completely accurate in the time the printer has sat for.....it is often years, not months......if you can do a nozzle text, that is going to be a good idea of condition

Are you buying aftermarket chips?

Is the nozzle test showing white?

There are some advanced cleanings if you can get your hands on a adjustment program that Epson provides to it's technicians. I am authorized Epson service, but cannot give you the program. I would introduce the cleaning fluid to the caps and them park the head on them and let them sit for a...

If it is intermittent, it is unlikely a configuration issue. If you print a nozzle test before and after printing are you missing nozzles? You could have an ink starvation issue which could be caused by a number of things, such as a bad ink cartridge (unlikely unless they are aftermarket), a...

If your vertical lines are not OK, you may want to try to adjust the feed.....there are micro adjustments that you can do to underfeed or overfeed to get rid of that. You may also want to try to see if you can try uni vs bi directional although that is not likely to help.

WeFixPrinters.com are here to assist with small and large format printer issues. We have been around for 25+ years and are Epson Large format trained and authorized. Located just south of LAX in Redondo Beach, we perform on-site and offer carry in services as well as remote tech support...

Pour some solvent cleaner that comes with the printer into the flush box after you clean the grid that pops out

That looks like a bad print head.....Message me and I can get you info on cost etc as I am an Epson tech wefixprinters.com rob

I am an authorized Epson tech...Rarely is the main board the cause of an 1A39 error....you would have to have had a terrible electrical spike or worked on the printer with it plugged in to damage the main board. Also, you don't need the adjustment program to reset the 1A39. The 1A39 does not...

That is a print head error, very rarely can be a main board, I am an Epson tech and can get parts. That head is around $1900, not terribly hard to replace although there is are some parameters printed on the print head that is to be input from an adjustment program that is available on Ebay...

Actually, if the cap stations are damaged or stuck, you may not want to mess with them, you can however, slide the head all the way to the left and open the head maintenance section, you can then dab the face of the head with cleaning solution (or ink if you don't have the solution and then...

There should be a small plastic door on the right side with a screw, if you remove the screw and the cover, you can insert a long phillips head screwdriver in the opening and and manually lower and raise the capping station.

How about using the firmware update tool from Epson's website. If it is just cycling, you will need to put it in firmware update mode. If firmware doesn't do it, you may want to have someone flash generic parameters to it. As I may have mentioned earlier, most of these boards come without...

You may also want to try having the tech flash generic parameters to the printer. You may also want to try to reinstall an older version of the firmware....If you are using compatible ink, that could potentially cause an issue. What was the reason for changing the board in the first place. I...

These printers are under high pressure and leaks are common in a few of the junction boxes. There are rubber O rings on most of these junctions....If you see a leak coming from a junction box, a common area is to the right side of the main board, behind the paper lever....just take a #1...

Hello...I am an Authorized Epson printer tech with 25 years experience, based in Redondo Beach, CA, near Los Angeles. I'd be glad to offer my tech support help, provide parts, or perform repairs locally. We fix Surecolor printers and all Epson Pro Graphcs printers. We can get print heads...