Search results

Any photos of what you have printed besides the test colors?

https://healdsburgsigns.com/

Nice postage stamps..

Set vacuum to HIGH.. Looks like a head strike on the media and not a print problem. Unknown what is causing the tint in the third photo, short of the black is not filling the damper properly. I presume the print started at the top?

Due for a new printhead..or a real good soak and clean. But experience says the head has just about done its time.

Printed a sign 20years ago on 651 using mild solvent inks. Only needed to be 24in x 6ft so instead of wasting print vinyl I just slapped it on 651. The sign was only supposed to be up for a month or so..It's still there to this day

Change dampers for starters

Log into paypal.com yourself. Check activity, change your PW. .NEVER follow links from anything that you haven't setup paypal or any other platform.

That exactly what we usually do myront and measure the door or hood width and scale it in either Flexi or Signlab.. Everyone to their own.

?? https://www.the-blueprints.com/vectordrawings/show/4004/nissan_elgrand_x/

Just means the setting and sensors of capping station and wipers

Recheck everything, tighten the belt slightly more and test again. The slightest deviation will give errors. Download the service manual and follow all procedures.

Have you got something overloading your scan motor? Carriage rail clean, tensions correct, bearings lubricated and free, encoder strip clean,sensors all testing ok? Theres a number of things that add together to cause the issues you are having.

Only need to power off with front button.

Did you turn machine off and then back on after doing any settings adjustments? Need to do that to save all settings. Internal Error 1942091 could be caused by a variety of factors (e.g. flushing adjustment, encoder scale/sensor issue, belt tension, etc)

The only other thing I can think of, is the capping station height hasn't been set and the two locators aren't positioning the head carriage properly. Page 170 https://www.manualslib.com/manual/1645297/Roland-Soljet-Pro-Iii-Xj-540.html?page=170#manual

Most Rolands are the same for the limit initialize setting

Clean the encoder strip more above the capping station, do another limit initialization and make sure you set it on the lock correctly.

Walk into a printer factory and ask to see what consumable components they manufacture...

Fuse location