Search results

I need to glue the grey 4.5'x2.5' latex-painted 1'' HDU panel to the face of the larger 6x4 latex-painted sign. I think gorilla glue would hold very well, but am afraid it might expand too much and I have known liquid nails to get hard and detach. Would you use silicone? Screwing it down is not...

I guess I could hire another shop with a bigger plotter to cut it for me.

I would rather cut it out of translucent vinyl but my plotter only cuts 24'' and I would have to panel/seam it.

Yes, there would be solid white vinyl on the negative space. My thinking on putting the print on the backside or "reverse" is that it would last longer. no? Otherwise I would just use white polycarb and put normal translucent vinyl on the fronts of the faces.

Fluorescent tubes. and they are flat faces, but the cabinet is 20'' so I would think there would be no hot spots. No?

4x8 clear polycarb faces with translucent PRINTS on the backside. How long should they last? The cabinet is 20'' deep, Thanks!

The graphic on my trucks window has been on for a couple years but still looks fine. It's beginning to come loose at the top edge. Is there some type of adhesive I can dab up there so I can get a few more months out of it before trashing and re-doing it? Thanks! :)

Duh, I've been running that router so long, that I momentarily forgot what I cut my teeth on, I have used my Porter Cable oscillating sabre saw like forever. Yeah that would work. But a sample just arrived, about an hour ago, of some new "U-blast" high tack sandblast stencil and It's very thin...

The first problem with that, is my router only cuts about 50'' wide and this thing is to be over 60''. The next thing is, how would you gluie it to the concrete tower? Gorilla Glue? Liquid Nails?

Please excuse my ignorance; what is "ACM"? Just a sheet of 3M controltac or something?

This isn't a ''woodgrain'' as in a sandblasted look, but it's an old job I did before my Aspire upgrade, I had to outline the letters to compensate for about half the radius of the large bullnose, then I profile-cut the letters with a smaller bullnose for a cleaner look...

The webpage doesn't seem to list a thickness. https://ublaststencil.com/ For years I have used Anchor #153 for pre-paints and #155 for raw substrates. I also tried Hartco 930 and 425 while Anchor's factory was down for awhile and I couldn't get it (Hartco is JUNK) I think the Anchor is 35 or...

Has anyone ever used this brand on raw HDU? https://ublaststencil.com/product/623/

Customer says the round band part is 5' high. Pretty small for a water tower I would think. I'm thinking most of that smaller detail could be eliminated.

I asked and they have used pounce patterns before, but the surface is too grainy to get a good transfer due to the detail of the graphic. Do you think Gerbermask Ultra 2 would work on this?

I can do pounce patterns and all that, no problem. But this is the customer doing this. I ain't climbing up no water tower, rappelling off the side or even going up on a bucket truck. :) The customer tried some vinyl and I don't think it will stick like he wants. He just wants a stencil so he...

A customer wants to paint graphics on a concrete water tank with stencils. The tank has been coated fairly rough and top-coated with latex paint. At first I thought maybe high-tac sandblast stencil but now I'm not sure. Does anyone have any suggestions? Thanks

Yes, 3M is what I normally use too. I use the 7125. Thanks!

Does anyone love/hate Avery SC 900 vinyl? Grimco says it's rated 10-12 years. What do you think? Thanks!!

My customer wants a portable frame large enough to accommodate a 4x8 panel. Does anyone know where to buy one of these? Thanks