Search results

If this is anything to go by my Mutoh 1641SR was so badly supported by Mutoh and by the Print Media Suppliers it was returned. I am now running a Roland VersaExpress RF-640 and Roland will talk to me regarding profiles and issues I have had with it (very few), which is more than Mutoh ever did...

I purchased a Mutoh 1641SR last year and I had to send it back. If the Pro version is anything like the standard Mutoh 1641SR you are going to come stuck for profiles and will need someonr in to profile it. Mutoh would hardly speak to me and only referred me back to the supplying dealer who...

Really?

My wall is 16' X 8' roughly. Bayou Graphics is stunning, but maybe a little too like a cartoon for my choice. Wha My wall is 16' X 8' roughly. Bayou Graphics is stunning, but maybe a little too like a cartoon for my choice. What size is your wall? SC

I am looking for a piece of artwork to decorate the rear wall of our print room. Does anyone have any available that maybe I could adapt for our sign shop? Many Thanks SC

This could be your problem or try replacing with a new cable. Our old Valuejet 1604 has a faulty ethernet socket. I do not want to take it apart to repair as I fear I will do more damage than what is already there. I strap the cable up on the back of the printer forcing a better contact to the...

This is a rough idea as this is the van. SC

Honestly the client is an elderly gentleman and has no grasp on how computers work let alone the worl wide web! As this is a vehicle I have no vehicle outlines for it is making it especially hard. He was wanting something with more of an original US design rather than what we do over here. I was...

Can anyone help me with a design for stripe work graphics on a 1981 Chevy Van Beauville Day van with side windows. I realise this is a big want but I don't come across these vehicles much in the UK. The colour of the van is metallic blue and the only request is for white, silver and yellow...

Also the read error could be a problem with the chip readers. These are a common failure and I have replaced loads on mine. SC

Capping station problem. Easiest thing to do is replace the complete maintenance station especially if the head is new. SC

I I now have my new rf-640 printer and GR2 640 plotter installed. I have to admit how much easier the versa RIP is to work than onyx. Also the plotter is basically a rebranded Chinese GCC which are not the best but it seems to work and track OK even though the alignment marks on the front are...

I am still waiting for a response from Mutoh US, Europe & Japan after 10 weeks!! I tested Roland Customer Service and they had contacted me within 5 minutes! The amount of profiles kind of swayed the deal as it covered every one of the materials/manufacturers we use.

Will do it is to be installed next week. Loads of profiles and backup directly from Roland. Unlike other manufacturers!

Yours is the later dampers with the plastic fittings. They should just unscrew the same. If you have a new damper you will see it is threaded. You can see the green 'O' ring. SC

Sadly this is the deal I have been given and I realise the Summa is the one to have, but the budget is not there. I personally don't think the Graphtec machines are as good as they use to be. Has anyone got this printer? SC

I am getting a New VersaEXPRESS RF-640 and matching CAMM-1 GR2-640. Has anyone experience/advice with these machines? Thanks SC

The damper have a brass fitting on them and they just unscrew by hand. There should be a small rubber seal that seals the line. SC

We had a new Mutoh Xpertjet 1641SR installed 3 months ago after running (and still operating) a Mutoh 1604 for 14 years . Due to the complete lack of support from either Mutoh Europe, US or Japan and a supplying dealer with limited knowledge (probably caused by Mutoh) the machine is being...

Still got my 1604 in our workshop. Might be bringing it back into the print room.