Search results

Use OPOS paneling. I cut stuff that’s 10’ long, striping, lettering, printed and laminated on reflective. Turn velocity down, I set anything rated for g’s down to about 1. Check and clean pinch wheels. I also added two more pinch wheels. Vendor said that won’t do anything but it does...

The Summa DC5sx will be identical to the Edge, except you can print wider. I still have my Edge LE I bought in 1998, and replaced print head under warranty and it's still working fine, though I don't use it much anymore.

I always us SCC to diagnose if it’s a problem with the cutter or aftermarket software. SCC is King.

Also using a pressure washer will pop out the holes

I do not have a clue on how to do that I use what little profiles I have which is what I have in SignLab and they only supply a few for SS2 inks and I use ES3 inks I’ve been getting by and when I check online with manufacturers no one that I’ve seen so far has profiles for ES3 inks you’d...

Actually I hadn’t tried other profiles I guess I have more testing to do thanks for thinking outside the box!

No I haven't tried the Avery T-1500. Haven't heard of it either. I have an eco-solvent printer. Thanks for the tip!

Good to know. I liked the 3M 3200 because it was cheap in price and preformed reasonably well. I never used it on vehicles, just on signage. I will look at the Avery V4000. Thanks for the tip!

Nope. I already printed on clear laminate, then I'll have to laminate that then mount on reflective then mount on the signs. Won't be buying that stuff again. At least the 3M 3200 series prints fine. Not made for it but the ink holds well.

The verdict is, No you cannot the ink just pools and swirls So now you and I Know

Hi I have the Evolution 3 Freehand cutter Works very well but because of no fixed base to it you really need a flat surface to use this cutter They are very well made. I have the 120” so I can cut 8’ width prints and corroplast sheets KeenCut products are very highly rated and very well...

Nope! What a pain. The Summa has to read all the rollers then cut, then when you rotate it, it has to read the rollers again. Too slow. Back to the drawing board again.

I am thinking out of the box here and maybe I should just utilize what I already have. I have a KeenCut Evolution 3 Free hand 120" cutter and a Summa S2T160. I can roll up my banners and prints on the summa and just use the cut off function, and set up a flat table just for the KeenCut cutter...

Yeah, the Neolt are made in Italy. Price between these two are roughly $1400-$1500 with the RS being less $$$. The Neolt only has a gap of .6mm so it won't corroplast for sure. Thanks for the lead. I saw them on Binding the other day.

Right now I'm seeing this unit come in at $4200.00

ok. I will look into this more. One other question. Set you set the travel according to the sheet size or will it only travel the entire length of the machine. Ex. If all I'm trimming is 4'x6' panels, can I set the travel to 80" so it doesn't travel for nothing? Again, thanks for all the...

Ok, just wondering if you bought this directly from China or from a vendor. My shop is in Canada but I'm 5 minutes from the US and can do imports on equipment if I can only get it from the US.

Well a laser line can be swapped out if it's that bad. Is the cut clean and straight, or wavy? Any issues getting tech support or parts? Roughly these machines are going for what?..4K$ Have you cut corroplast with it? Or just paper and vinyl? Thanks for replying!

Hello all. I am looking to purchase an electric trimmer. I've looked at the RS, and saw this FAYON on YouTube one day. It has different blades and also cuts corroplast. Does anyone have and use one and how do you like it? I know it's made in China, but so is my Mimaki JV150-160. The FAYON...