Search results

I have seen that be an encoder issue but also an electrical short in the head circuit. The encoder and sensor are the cheaper items to change so you could start there. Try cleaning it first. Other than that, most of the time I see this, it's a bad head cable, bead print head, or other damaged...

Yeah even on my official Mutoh price list it doesn't mention your model on the 800mL section but my rep confirmed it does work. Shoot me an email and I can get you a quote - support@solventinkjet.com

Mimaki cutters will run on mac's latest OS. They aren't really entry level priced though. Their low end 24" is about $1600.

Mutoh says you can use the 800mL bags if you have the bulk adapters. I can dropship those adaptors and inks to you directly from Mutoh.

The ink your machine uses does have an 800mL option but it doesn't list your machine as a supported model. I asked my Mutoh rep and I'll let you know what he says.

Yeah I usually just check to see if the pressure is staying consistent. If it's all over the place, sometimes it can have issues but not throw an error. Mostly out of habit.

No, the black and yellow should be completely separate. Usually when they are mixing, the first thing to do is do is check the pressure system is within spec and do an air purge. The next would be to make sure the cap top is sealing and draining properly. Also just make sure the wiper isn't...

Edit: I found the part numbers you mentioned in my price list. They want $257 each. In general, Mimaki will tell you never to mess with the linear rail as it requires special equipment at the factory to get installed right. They don't stock them here in the US for that reason. One of our...

When I was trained on the Mimaki JFX200, they said I needed to use the sheet every time I open the covers. I've never used it since training unless I'm leaving a cover off while I go to lunch.

Use whatever cleaner your ink supplier suggests for your ink. A few weeks can usually be unclogged with one or two head soaks. You shouldn't need anything super harsh. I prefer to use the Bordeaux brand flush solution. It works with any solvent ink and is a little stronger than the regular...

It's fine to change both at the same time. If you do the head alignments in the proper order, which is just the order they are in the service menu, they will align to each other naturally.

Are you sure your machine was setup for ES3 inks? I ask because only a limited run of CJV150s were configured for ES3 inks and the rest don't support it.

Do you change color profiles when switching media or use the same one for all? If you do change the profile, try the paper profile on the vinyl and see what happens. Profiles will sometimes use variable dot sizes or fixed dot. Heads can fail in one mode and not the other some times which makes...

When you push fluid through one channel and it comes out the other, the head is dead unfortunately. The membrane that keeps the channels separate broke inside the head which is impossible to fix. That being said, you should still be able to pull ink through with the station even with the broken...

That does make it a bit different. 3rd party inks will often use the same ink and just change the chip for sure.

This is why right to repair is so important. You were down 13 days and you could have probably put that cable in yourself.

Eco Sol Max 3 inks are compatible with the following machines: VersaSTUDIO BN-20 Series Printer/Cutters – CMYK + White and Metallic Ink** VersaCAMM VS-i Printer/Cutters – CMYKLcLm + Light Black, White and Metallic Ink SOLJET XR-640 Printer/Cutter – CMYKLcLm + Light Black, White and Metallic Ink...

Oh gotcha. Yeah solvent white isn't the best. The UCJV300 is usually a good machine but it matters who the supplier and tech is for sure.

The UCJV300 was an oversell for what you're doing. Get a solvent printer. Mimaki JV150, Mutoh XPJ1641SR Pro are two good options.

Mutoh's smart card system definitely fails more often than other brands I work on. The main problem I see is that 1 bad/misaligned card can cause the entire system to error out. They did do a firmware update that made it so you could have 2 cards fail and it would allow you to continue anyway...