Search results

Any updates?

Your glass syringe is perfect, provided it is big enough. I use these items, as the syringe is a Luer Lock type, as are the needles. This makes it easy to detach the syringe from the needle to empty the syringe. The variety of needle sizes let you find the right one that fits snuggly in the...

See Damon's post... I don't get into the exotic solutions (nothing wrong with them), as I'm more focused on getting the printer up and running as quickly as possible so my customer can start making money. Remember, in this business, down time is lost money. Not a fan of the approach as...

Added thought... If you want to be sure you have all the dried ink out of the lines, fill them with acetone again and block of both ends and let it sit for 30 minutes, then flush it out again.

Personally, I think you are beating your head against the wall on the heads... Four 8 hour soaks should give you more than a tiny amount of cyan. The ink is dried up inside the head where cleaning solution can't get to it. Yes, it can be removed with ultrasonic and cleaning solution, but the...

Here you go. It should speed things up considerably, at least on files that are smaller in width...

In the immortal words of Lazaras Long in Robert Heinlein's 'Time Enough For Love' - “Always listen to experts. They’ll tell you what can’t be done and why. Then do it!”

If it worked for you, consider yourself lucky! These heads are manufactured as a single, unrepairable unit. you can clear clogs with careful work, and replace the manifolds, but doing any internal repairs, such as fixing an internal membrane isn't possible.

No problem! The operations manual is the same thing as the user guide. The service manual is for repairing and aligning the printer by a technician. Operation/user manuals are always readily available. Service manuals are more difficult to find. Manualslib.com is definitely a good source, I've...

I have replaced ink lines before, and it is a major pain. The new lines have to be fed through the chain system and there are tubing size changes with couplers in the middle of the chain. It requires some disassembly of the chain system in order to feed the lines through. The ink lines are...

He needed the Service Manual for the 1324X, which I could not find online. Searches only bring up the 1324, which is slightly different than the 1324X. I have sent it to him... Your effort is appreciated!

I found your email in a different post. My apologies, as after exploring the search results, I see they are all for the 1324, not the 1324X. I'm sending you the correct manual. Check your email for a link to download it.

An alternative to replacing the lines is to disconnect the ink lines at both cartridge side and the damper side. Connect a syringe to the ink line at the cartridge end with some flexible tubing. Place the other end in a container of acetone and pull ink through the lines until the line runs...

I presume you mean VG640? Look at the head speed. You will find it under the quality setting section of the Queue# settings. You can override the current setting by checking the box next to ignore default settings. This setting will only apply to that particular media and quality setting, i.e...

Send me your email.

Google works very well. A simple Google search - Mutoh 1324x service manual. Try it... Much faster doing it yourself...

Damon, check your messages.

Fortunately, the Q1 transistor is available, after much searching. I have ordered a couple of them for my board repair stock and will have them in a week. If you do decide to order a used board, make sure it is returnable. The key will be if you have voltage at the fuses. Troubleshooting...

To clarify the cable I'm suggesting, it is a 4 wire cable going from CN4 on the servo board to CN9 on the mainboard. The head power voltage goes from Q1 on the servo board through this cable to the mainboard and on to the printheads. In addition, it supplies the voltage for both fuses that...

Check your messages...