Search results

That looks like a lot of deflected nozzles, in fact I have never seen so many deflections and no blockages on a single colour. Firstly is the head physically clean, as fluff and other debris can get onto the head if not kept clean. Has their been recently a very bad head strike as this can cause...

This is a capping problem as Black and Magenta are on the same head. The ink has wicked (if their is such a word) when the head has been parked. I would check that the pump is pulling correctly. Also if their is a pool of ink in the cap this will be creating this or the head is touching the mesh...

Greys are hardest to hit and probably any slight fade in any of the colours applied will change the colours darastically. On a similair note. I carried out an install of some gold metalic acrylic stand off letters onto a cladded building last month. The job looked great on install, but I passed...

STEE-EYE-UNNING... Amazing Work. SC

Just what I was thinking so I have ordered new ones. SC

I bought one of these exactly two years ago from digiprint. Item was as good as the original (in fact the only difference is the wiper is a bit stiffer than the original, but easily replaced). It is still working perfectly, but I do keep it spotless and once a week flood the cap with cleaning...

We have had our Valuejet 1604 from new back in 2007 and it still is going strong! Over the last 2/3 months I have seen an excessive amount of debris/dust/dirt on our prints. I was at a loss where it was coming from until last week and it seems to be coming of the rubber rollers which clamp the...

It will be a RIP and colour issue. Sometimes greys are very hard to hit bang on. And when you have hit that colour another will change. SC

If it has been sitting that long the very least it will need is a new print head, head cable and complete maintenance station. It has been too long of line to hope to reinstate the head even if it was left with cleaning fluid in it. You will save time and money if you replace these three items...

Pmd Dynamicgraphics

Good Grief..... I also have a bunch of wraps and jobs that need designing but like yourself I don't have any information to give or time to spend on it! I don't think you understand how this forum works. Yes we would all like someone else to do the hard work (designing) as this is the area...

This maybe a damaged head release which is easily bent back. Or maybe a faulty axis motor. I would be also checking all the sensors to see they are reading material and position. Also I would be looking for something simple other than the mainboard, Panel Unit and power supply. In my experience...

My question would be, was the head cable changed when the print head was fitted? Also a slight drop of ink into the head cable plug would cause a short. And maybe lastly you were just unlucky. I have found that the Mutoh Valuejets like all solvent printers thrive on being used a lot. If this is...

If the machine has been left for a long time and did not have the cleaning cartridges left in the head is clogged and is unserviceable. Fit a new print head, head cable and complete maintenance and provided it was running prior to the machine being last used this should get you up and printing...

I am struggling to understand. If I remember you can plug any cleaning cartridge into any slot they are not colour defined. If the cartridge is not being read the reason maybe that the chip on the cartridge is broken. In my opinion the only reason to use the cleaning cartridges is to flush the...

Sounds like the F2 fuse on the board has blown. This will need replaced and probably a new print head and cable also. Just remember that fuses only blow for a reason and are a protection for the motherboard. SC

Thank You so much SC

This can be a whole load of things. But with the yellow dropping out I would suspect a leak/crack from the manifold as these get brittle over time and can snap causing the ink to leak back during print even though it pulls ink through. As for the thin line on the black it could be just a...

I guess either vance got this fixed or he is running around like a headless chicken. How did you get on? SC

It looks like Bodini Bold but it isn't. Cheers SC