Search results

Problem Resolved , Previous owners replaced Main Pcb and Slider pcb and did not have the parameters & settings loaded into the new boards . Put the old boards back in and it works and does test prints . Life is good again .

This is a new (Old ) machine for me - I have its twin which works fine - This one Boots up fine, no errors , everything looks fine , Good inks , work height is set, When I Do a test print its gives a 901 error code - resets Gives the error code whenever I try to test print or do a regular...

The original 3042's did not have LF-140 inks in the firmware. That was the reason for a work around .

I never did get an answer on this one - I ended up using LH100 chips on LF-140 Original cartridges and using the LH-100 profiles - Needed to clean the Ink Lines with acetone and change the Dampers and it works very well . There is a lot of work involved so dont recommend this unless your a...

Appreciate the help with this. Great info and plenty of links . I was able to find exactly what we needed x2 Yes I bought 2 machines. One word of caution for anyone looking for used gear - I ran into scammers on the auction sites and on social media sales channels that were completely bogus ...

Hi Nick, Thanks , Ill give you a call tomorrow .

check your ribbon cable , make sure its not in backwards and the contacts are not corroded or missing .

Thanks Steve, Ill give you a call .

Thanks Ken , but its the wrong flavor - I need a UJF-6042 UV machine to do what we need . The Old ones use the same Ink , cartridges and parts as our smaller machines and I know how to work on em . Spent a lot of time in your neck of the woods back in the day, Navy school in Great Lakes and...

Nice ! Thanks

Got two 3042's and Its time to add a UJF-6042 to the shop, Not enough wallet for a new one this year - Are there any Used equip dealers or brokers that we can go to to scrounge up an older model or even an old warhorse we can refurb.

Make sure your cartridges are aligned in the slots properly, Make sure they are pushed in and seated , Clean the chip contacts and make sure they are not damaged . Pull the cartridges and inspect the contact boards / wires in the back of the cartridge slots . They should all look the same...

Have two early Mimaki UJF-3042 s (non fx) They were set up for LH-100 rigid inks I have gone thru both machines cleaned & replaced filters / ink lines heads , etc . I need to get them working with the LF-140 ink set but looks like they were designed before LF 140 inks came out ...