Search results

Good luck.

The main board of the machine is just a PC-board. I dont know which operating system is running on that board.

The connector inside the printer is VGA, but I have tried to connect a VGA-Display one time for diagnosis (I made service on that machines), it havent worked. In addition there is - of course - a separate connector for touch (looks like 9-Pin-RS 232), no idea how to drive this.

You can set split lines manually by doing a right-click where you want them, or using the automatic split line feature in the third tab.

You should replace the belts too. The small belts on the motor, and the large belt driving the cutting head (a little bit expensive).

If your Cutter is set to a media size too small to read all marks and cut the printed job, this happens. The sizes doesn‘t need to match exactly.

You should use a self-adhesive tape, put it with the adhesive side on the roller. I would not use metal brushes, it is very expensive to replace the rollers if you damage the surface, better live with dirt.

Omega 5.0 works, 4.0 and lower have issues with Windows 10.

Yes, I‘m in germany. I have some experiences with colorgate (some profiling and troubleshooting), but with the focus on other RIP-solutions.

The softwares have different focuses: if working with cutting plotters or preparing files for any mechanical reproduction reducing the number of nodes is much more important than with a mainly Design-Software like Illustrator. You can have now a Flexi Designer for Mac again, with cutting over a...

The pinch rollers can handle the weight. It is that the motor needs different power for moving different weight of media. Always slack the roll would help, but compensating the size deviation in the Rip would too.

It could happen with roll printers that the output sizes don’t match, often seen with thicker banners. You should calculate the factor and resize the file in the RIP.

That doesnt matter. you can install the plugins for adding the marks on your computer at home without winplot installed. If you do not have Corel installed on the computer on which winplot is installed, you can install winplot anyway, could send the plot data from your corel to „your“ winplot...

If you use onyx, you just can point on a colour in an image or graphic to select a color to replace. In Ergosoft, on-the-fly color replacement leads to getting lists of all colours of a specific mode, and you need to select the color from that list. And, color replacement wont work with all...

Which software do you use for cutting? There are plugins available for CorekDraw to add OPOS-marks to your artwork, and to send your job to Winplot or Gosign. From this softwares you can send the jobs to a cutter in a way what will start marker reading. Look for contour cutting related to the...

You have the knife holder for the 60 degree knife installed? You cut vinyl with a 60 degree knife? Is the knife depth correctly set?

Depends on your application. The best (but most expensive) device is the Barbieri Spectro LFP qb, it could do reflective and transmissive measurements, can change the size of the measurement apertures, does scans of complete pages automatically, can measure touchless or with moving measuring...

Sometimes this happens when the OPOS-Sensor is snapped out of its correct position, or the OPOS holder is damaged and will not set the sensor reliably in place. Check if the OPOS Sensor is in place and can´t be moved (apply not too much power).

Caldera does a kind of true shape nesting (is named "contour nesting") as a standard feature, without additional costs. And a Caldera Softrip for a small or midrange printer like a Latex 365 is not neccessarily more expensive than an onyx postershop. And Caldera, in opposite to onyx, allows...

Hello from germany.