Search results

I would take a .25 acm spray it gray then possibly have vinyl cut and bury it in satin clear, if I were doing it. flatbed or screenprinting (if thats even an option anymore could also be done on lettering...can you feel the lettering at all?

You can try lacquer thinner and see if it eats off the lettering that would be my best bet, dont leave it on too long, but you are definitely going to have ghosting. IMO I would walk from this job and let a body shop handle this

instead of running this guy thru regulations and seeing if what he is doing is compliant I would do the billboard out of 13oz banner material. sign2trade is the absolute best banner company we use for this We are not the COMPLIANT police of the world. Im not here to play 20 question as to what...

If I was doing that quote I would place a small black line under the orange line and that would tell me where the orange line goes. As far as pricing AS AN EXAMPLE I would do a single for $100, 50 of them for 90 per and 100 at $85. thats a lot of labor to cut something that large and a lot of...

Several years ago I bought 3 newborn guns and they are all 3 still alive I think I paid about $30 per, just keep them clean. get them on amazon or ebay

No, its time to celebrate. you do not need window updates for anything. your computer will run just fine and life will be great. No more suprises, no more updated that cause issues

if it temporary we use fence wire from home depot, if permanent we back it with smaller piece of material and handware

if this is just matte acrylic blanks with vinyl use http://eliteletters.com for the blanks and letter them yourself if this is raised print use https://www.bellcoinc.com, you cant go wrong either

hope this is what you are looking for

conform R series we stopped using transferite because of issues other than what you said but I just dont like it

We designed one several years ago that we subbed out to larger sign company and we did a plate mount. Existing pole had plate on top so we just put plate under oval and mouted that way. you can also do saddle mount where the pole slides up inside oval and peices were fabbed to cover the place...

ABSOLUTELY! no matter who or how they contact me I send them straight to email then we can get down to business

When a customer comes to you and you tell them "you can handle that order" and follow thru YOU are responsible for any issues. Thats your job no matter is you subbed out or not. If the shirt guy said tuff tit refund the customer in full take ownnership of all shirts and trash them and you have...

looks like roper

silicone is just fine. What we have done in past is cut pvc circles about 3" diameter, 2 part epoxy primer on both sides and silicone them to back of acm sign. The pads on top of sign were drilled and studded so I could have something anchored into wall and of course silicone the other pads...

Good deal, new or used? what did you pay

Dell XPS 8900, 1 TB, i7, windows 10 (if you must), you cna get them for under $450 used

get you a used Dell XPS thats all I use. they are great machines and do you need windows 10 you might be able to snag a windows 7. Theres no sense in getting a brand new comp

You had me at contractor!!!

blow it off real good as far as primer you can use a high quality exterior flat and spray it on possibly 2 coats of this. We use nothing but BEHR paints, they hold up just fine and NEVER use oil based