Search results

Still on Max3 ink?

You have to be more spezific. Do you want the rip to print with black only? You can define a CMYK color with k component only. Then in Versaworks you can set use linearisation only in color management. This way, the color is printed with k only. But this doesn't give a neutral gray. To get a...

The problem is highly likely the lamination. Opos cam is fast in recognition, but less accurate and versatile, than standard OPOS.

The wayback machine doesn't save all old website content. Think of the amount of storage they would need.

That's why I changed to Max2.

The FB550 heads are closer together, than the 500.

Here you go...

You need to check the alignments. Print a hairline square 20x20mm or one inch with CMYK 100,100,100,100 first unidirectional, then bidirectional. Then you should see, if it's a bidirectional, or horizontal misalignment.

Replug the flat cable on both sides and be sure to close the locking mechanism. If it doesnt't help check the coils resistance.

Definitely not normal for a VG3. Looks like something on the encoder strip, as Solventinkjet pointed out.

When you can suck ink from the captop with a syringe and there is no printing at all, your fuse is probably blown. Get a service engineer with all the parts, if you need the printer soon.

There are vinyls, that deform so unevenly, that the cutter software can't correct it. Try another vinyl and see if it improves. Since it is a Summa cutter in the end, it's the best cutter on the market. You can also check, if you use the latest firmware and the latest availabe version of SAI...

There are bad Max3 yellow cartridges. When I started having those issues with several customers, I switched then to Max2. I never had issues with Max2.

I would look for posts with GCC cutters, because that's what the GR2 is behind the Roland label...

Max3 was introduced in Europe, due to chemicals at the workplace regulations. They dry fairly quick. On the print medium, but also in the printer... On introduction, they were also advertised to work on VP and SPi. We had our troubles with DX4 machines and switched back to Max, or Max2. The ink...

Yes, in color management. Try true rich settings.

They tell you to do a refresh, before you clean manually. This lowers the chance of contaminating the nozzle plate with ink gunk. Before the the introduction of the refresher, there was a manual cleaning to be done at the end of a printing day. Nobody likes to do it and it was often omitted...

The 5 profiles you mention are output profiles. I was referring to input profiles under quality/color management...

There is only one primer available for printing. If it doesn't work for your application, you need to manually apply it to your medium before printing.

Looks like air in the head. You can weigh them an compare it with a new one. If it's 10g less, discard it.