Search results

I'm still new to print with my EDGE. Here is my setup: Gerber EDGE 2, omega 6, OEM black and white foils, oracal 6510 fluo vinyl. I'm using the fluo vinyl in omega. If I print my black color over the white, I have print problem (see picture below). But if I print white over the black, there is...

I have far better service at Grimco than ND. No one know their stuff in the montreal branch and my rep that is located in ontario don't know her product and take more than 24 hours to give a reply and often it's not what I'm looking for. At grimco, I have a reply within 2 hours normally and...

I think I will have to make a call to someone at ND then is I want to get better service.

I have some duracoat foils that came with the printer when I've bought it (I don't know how old they are, though). I've have more problems with the duracoat foils than the oem. Especially when I print small text and 80% of my decals are really small. But can you tell me what distributor sell...

It seems that NDGraphics is the only distributor in Canada for the gerber edge consumable. I hate their customer service and only have problems with them. Is there another place I can buy OEM foils? Thanks.

I don't know if it help, but I went to a machine shop with my current punch and asked them to create another one with the specification needed. Work like a charm and it is built better than a OEM one.

I was interested to have more details about this model. I've contacted them few time to know if they had a dealer in the montreal area and they never replied. Do you have a specific person I could get in touch with to have more information?

check the prices carefully. I've made two orders in the pass and it was cheaper to order from the US site and pay for the custom than order from the canadian distributor. But if you want to order the blades from a canadian seller, try this one

PM sent.

Do you know how much a machine like this would cost?

Sorry, I can't help but I'm very interested to know the answer too.

I don't own a flatbed or uv coater, but some shop around here run the material in the uv coater BEFORE and AFTER the printing. They told me the uv coating adhere better than the ink to the coroplast and the ink adhere perfectly to the coated layer. And I never saw them clean the coroplast...

Really? aluminum up to .050 and dibond? That would be great for our small parts. Do you have a more precise suggestion of a ''decent guillotine''?

This one is very interesting. No lot of variety but I'll definitely look at it. We mostly use shutterstock. At 10$ per download, it's easy to add it to the customer invoice.

If you cut alot, invest in a XY cutter like fotoba

welcome from quebec!

I think I was the first to order the aluminum model. Dale made me a bundle for the whole kit. I have a 26in-20in-14in that I can joint together and make different width configuration plus 3pc extension pôle plus t-handle. The plastic tip cover and comfort handle did not exist at the time tho...

Found this one on ebay. It's a 3-in-1. You can be sit at around 4in from the floor and you have a backrest. It is more expensive than the other one at 33$ I've found at home depot, but seems to be stronger too. At 450lbs, we could be two guys sited side by side cutting each end of the window...

So I'm looking for a stool or creeper for my installation. I will have to install frosted vinyl on around 100 windows. All of them make the whole wall high and I can't get on my knees to cut the bottom part due to an injury. So I was looking for another option than just sit on the floor. With...

I use the oracal HT55 or HT95 with all 3M frosted vinyl that have a clear film liner. Work really good, but like gabagoo said don't let it sit around too long and roll it very loose like 4in+ diameter for transport. I always premask the same day or the day before the installation. I seal it in a...