Search results

Does anyone know where I can get this product? Or does any one ever tried it? Seems interesting. http://youtu.be/3FBaK4f9hho

I'm planing to get a laser to mainly cut/engrave on acrylic. Since I will have the machine, I was wondering what other sign product I would be able to cut or engrave. I will have a 5x10 table with a 90w and 150w laser tube. I know I can't cut vinyl, but is there a material I could print on with...

I've found a stack of old playboy's magazine behind a bathroom mirror. There was 2 copy of the Marilyn Monroe 1953 edition in perfect condition.

wow, I'm very impressed. I wish I could work as fast.

We custom made our LED backlit panel. They are only 13mm thick. We also make them with snap frames to change the visual, only 7/8 thick. I would use those panel to make the effect you looking for.

I think he make his double cut but only peel the part on top and leave the other part behind it. The white line is the ''thickness'' of the material.

I do alot of frosted job like this and your problem is rapidtac. If you don't shake your bottle very well before using it, it could stain the vinyl on top or rear of the film. Even after that, you can still have the problem. Like other said, try to clean it with rapidtac and if it does not work...

If only their products would be available in canada... :noway:

Great! Thank you. I've finally ordered them on http://www.craftics.net But next time, I'll try proveer.

good point.

Does anyone can tell me where I can find those in Canada? I've looked over the web without any luck.

Like the title says, what drill bit do you use for acrylic and polycarbonate? I would like to find something that will make a clear hole without using lubricant if possible. Thanks. Ben

thank you very much for the infos. I'll try that and let you know. Thanks.

yes, I always use them on both sides of the prints.

Hi, I have an HP L26500 with caldera 9.2 rip and no matter what I do, I have banding in my darks colors (more visible in black) at 8 passes. If I print at 10 passes I need to check the print at a certain angle to barely see the banding (my wife do not see them). All my print heads are new (still...

I've found that washing the wall with Isotopic alcohol give me good results. It does not always work, but help alot. Now, depending the size of the job, I ask that the wall have to be painted with cheap contractor paint and wait 30 days before installing.

I was wondering if i lay down a non pvc vinyl on acrylic and cut it with a laser, do I still have chances to mess the laser like regular vinyl? If yes, what would be to other option other than paint or direct print with a flatbed?

I have a D160 and had this problem before. You simply have to adjust your cutter. I don't remember the exact name, but it will cut two path, then you mesure them and enter the value in the cutter. I know it's in the user manual. I hope this will help.

I don't know where you are located in Canada, but Mauco here in Montreal have alot of special products. http://mauco-ind.com/ Ask for Julie if you call them.

Can I ask you how much did it cost to built. I want to built a garage with those exact specifications someday.