Search results

In addition with the Latex you can also change the Ink Density to increase the amount of ink that gets dropped down.. remember to increase your dwell time in the heater to compensate for the increased amount on ink.

bump

It looks like the same font for both, but having problems finding a match.

Yes we have about 90 yards

We just picked up two of the 570's and haven't really had any issues except a few error codes. Biggest thing to look out for is the heat setting to make sure the material doesn't bubble up on you. Other than that it's a work horse of a machine with great quality and color. As far as the inks...

So I'm using Flexi 12 with a HP570 and a Graphtec FC 8000. When cutting a graphic on the Graphtec and the job is done, it sometimes goes to the end of the job and sometimes it goes all the way back the be beginning. Most of the time with smaller runs it's not an issue, but on bigger jobs it...

I rocking an HP570 and for clear we use 3m 3650-114. It works great every time. As far as reflective I run 3290, IJ680 through my machine no problems at all. The only reflective that I have to be careful with is Diamond Grade and High Prismatic, only because it's so stiff I'll use the edge...

I use Flexi and the rip will do it automatically. Yo can even tell it how much of an overlap you want and it will flip every other panel with the simple click of a box.

If your doing street signs, there are very specific guidelines that you have to follow. Most of these utilize specific materials and sizes.

As far as Corel vs Illustrator, it's like 3M vs Avery or Oracal. Pretty much what ever you learned on is what your preference is going to be. My boss pretty much uses Gerber Composer for everything. He's very good with it and knows how to use it and all I have to do is than convert the file...

Can't you update the firmware directly from the printer?

I had a a similar issue with one of our HP 8000. Could be several issues going on. First when it goes through a cleaning cycle do you head and grinding or chattering noises that sound like gears are slipping? If so than the issue is going to be the bushing on the gear axle, it has worn down...

It all depends on the color you looking for, type of material/application, and your setup (what equipment you have) But yes Gerber, 3M, Orafol, FCD, Avery, Hexes all make solid color material that you can use for a consistent color that you cut from. I know that 3M will make rolls of custom...

I guess I'm a little confused for what your looking for. Are you just looking for cut ready graphics? have you tried the Clip Design? There are many sites that also allow you to download vector graphics and re-size to vehicles. What about Shutter stock, I know Image 10 has issues with sales...

We recently made the jump from Solvent to Latex and we're looking to liquidate our old solvent supplies and inks. Everything listed below is for HP8000 500 ml Ink cartridges Cyan Magenta Yellow Black x2 Light Cyan Light Magenta x2 HP Cap leaning kit Cap cleaning fluid 300ml x3 Cap cleaning...

We just did a kit job that was sent to us and they used the new 180 MC and it started curling back on some of the edges after a few weeks so we had to reprinted it on to 180CV3. Not quite what the issues was but going to wait till they get the kinks before we switch.

After looking at it again it looks like this was made in Photoshop. They used a stroke, inner shadow, and outer glow.

In Illustrator you can add a stroke with a gradient.

Looking to match this font for a client. Any help would be greatly appreciated.

Faith in you or not, sales people need to appreciate the time and talent it would take to create something like this. With a budget of $3000 adn the client has a very specific vision, the sales person needs to explain that either he needs to changes his expectations or he needs to increase his...