Search results

Yes, the sensor touches the media.

Welcome from Offenburg/Baden-Württemberg

Would be VERY HELPFUL to know the model of your cutter. There are two main generations of OPOS, and the older one could have problems with todays inkjet printers because of possibly low density of the print. It is possible to calibrate the sensor (is named media calibration).

The PNC5000 is a machine from the mid-90s, it will be hard to find any consumables or spare parts. I would not invest any time or money.

Mimaki Profile Master and a Spectrophotometer.

You can download a current version of Winplot for free From the summa website. This software is for plotting, not for designing. If you wont pay money for a design software, you can use free Inkscape, exporting EPS and importing it to Winplot.

Flexi uses the regular Windows System Fonts. You will be able to remove them through the windows control panel. Flexi also supports some special font formats, they can be found in subfomders of the Flexi-Folder. Bad Luck if old casmate fonts are the problem: they are saved in groups in font...

The OPOS-CAM has exactly the same functionality as OPOS X, except that OPOS X will start to circle if it dont find the marker at the right position (for example the media is skewed), while with OPOS-CAM the head needs to be moved manually if the marker is not in the area the camera detects. And...

Needs to be activated in the driver options in caldera. Because of this is not supported from the beginning of that printers, it could be that older caldera versions do not support it. Not shure about v10.

Strange. I would really try to download the factory settings from the summa homepage und overwrite the current internal install. If this wont help, replacement of the mainboard could be neccessary. By the way: could it be that some magnetic effect take place? For example, is a big electrical...

You mean Inspire? In the preferences dialog in the edit menu is an option if Flexi saves preferences when closing, or not. If this option is unchecked, it could happen that settings you chose will not be applied permanently. I would check that first. Inspire is a Flexi predecessor of scanvec...

Have you tried a factory reset with your plotters initial configuration downloaded from the summa website (at the end of the download page, set your serial number)? When the knife drops on the cutting strip: does it fell out of the knife holder? Or does the complete mechanics lower? If only the...

Flexi can do that. Boxing and Trueshape-Nesting (Flexidesigner, Flexisign, FlexiSign & Print). And Onyx has published a software „Trufit“ recently for trueshape-Nesting, but mainly for printing (havent tested until now if it would work with cutting data too).

Tracking issues: shure you have autoload enabled? With this option enabled (is enabled by default) the plotter will spool media off the roll before plotting, to avoid running into roll weight while plotting. Do you use the media flanges? Check the backing of the media you use, and compare the...

You can use Flexi Subscription, so you wont have one big payment. But I agree to Fred Weiss: Omega would be the best solution.

You‘re Welcome. Just open the Preference Manager and click „Save“. When I do it, I set a date as the preference name“.

There is no possibility to scale the icons, BUT: in Menu File - Workspace you can switch the appearance to Flexi 7x: in this case Flexi show up with very little icons.

It is mandatory to use the outer rollers on the edges of the media. You can disable any of the middle rollers by pressing a lever at the back of the roll holders, so a single one too if there is no gritroller to be set on because the media is to small. If you have a SummaCUT-R oder a S-Class...

If the cable wont work, it could be the head. Good luck.

Is this a wider model? Could it be that your model have inner rolls, and you use one inner and one outer roll? Of yes, this will not work.