Search results

Hi. Older Versions hat a density slider for the markers, I do not find it in current 19. Should be a problem with the profile.

Dont mix up: Amiable was a company who sells Flexi for years when they merge with Scanvec (the Company who have made Casmate and Inspire) to Scanvec Amiable (Today SA International) in 1999. When Casmate was 6.5 and Inspire was 1.0 Flexi was 5.x. But they have made a complete redesign with...

Not neccessary to set marks in illustrator. If printing through Versaworks, you need to activate the marks in versaworks, if printing through Onyx, you need to select the Soljet/Versaworks-marks in Onyx.

Summa DC4, available from Airmark (www.airmark.com). Thermal transfer, no liquids, so no dry up. You only need to protect it from dust. But: prints only on vinyl. Or, similar, Gerber Edge ( www.gspinc.com ) . Or KIP Large Format Laserprinters (www.kip.com). Not shure about maintenance, but it...

Regularly, the Settings of the generic profiles are a good way to start. On the other side, there is the HP Media Solutions Locator were you can find the settings of the media profiles for the 360, and you can start using that settings to build your profiles. And then, with that settings, try...

Check the IP-Adresses. Could be that the new modem uses a different IP adress range for DHCP than your old one, so that your printer and cutter - mostly configured with fixed IP‘s - are not in the same subnet with your PC anymore. Check the IP-Adress of your PC (for example using the status of...

If the dampers and heads are filled with ink, but the printer do not print, then it looks like a problem with the main board. At first I would check the head fuses, but not visually: check them with a voltmeter. Unfortunately you do not mention if you have a SP540V (fuses soldered on the board)...

Is in the quality tab, at the end of the window. It shows different color management presets, and „linearization only“. If not doing this, an ICC-profile is applied to the printed swatch, what changes the colours.

I havent meant the licence manager. It is the preference-manager to reset the settings.

Be shure to set the color management-settings in Versaworks to „linearization only“ when printing the swatch. Not doing this can lead to strange results.

Try a smaller panel size, and use the intermediate pinch rollers.

Could be that the settings-file is corrupted. Try to reset to the factory settings with the Preferences-Manager.

Looks like a sensor problem.

I would do a LIMIT INITIALIZE:

With the Latex 310, it is very easy to add new print modes with different numbers of passes to a media setting, just point on „library“, enter the media, and point on the „new print mode“-button, do the ink limit and linearization (color calibration is HP‘s name for that).

Will not work.

The best contour cutting system for roll cutters currently is Summas OPOS X. You will get it with the smallest SummaCUT D60R too.

The issue in black is a typical nozzle deflection. Hard to solve without replacing the head. 3 nozzles nearby in left magenta looks like a mechanical damage. I would have a look at the nozzle plate of the head.

Use the syringe to pull the ink at the tube of the capping. If you cant pull, the tube or cap is blocked, and you need a new cap. If you can pull easy, but the ink lines wont fill, there is an aor leak anywere (perhaps you can hear were). If it fills the lines, then it could be that the pump...

The level of 30 is for the sensitivity of the sensor, it have nothing to do with the accuracy. OPOS-Calibration is the important task. Problems with accuracy can be caused by a lot of issues: tracking problems, media deviations (for example when the media deforms because of heat) and more...