Search results

You could replace the flat cable which connects the printhead to the printer board. specially the deformation on the right side looks like an electronical problem, often the flat cable (disconnect the printer from the mains when replacing the cable). To check that, you could replace one cable...

There are a lot of possible reasons why this could happen. You could check the back of your media for the tracking lines of the grit rollers, and compare it with the image attached. If you have bad tracking, it could be that your cutter have a problem (works with summa).

In which color you have printed the marks? You can do a media calibration at the plotter, you only need a rectangle printed in the color of the markers of about 3x3cm for it. Depending on your cutter model, you will find the information how to do that in the manual.

If you use a summa roll cutter, I think you could achieve the same effect by varying the knife depth (make it deeper) and pressure.

Why do you duplicate the path on top of each other?

With that color settings ("CutContour" and "CutContourFlex", set as spot colors), you need only 1 Prefix, the default "CutContour". I would delete any other Custom Cut Path Prefixes, could be that "CutContourFlex" as a custom Prefix will lead to a conflict. I will test it myself as soon as...

I do not know what's so difficult about it: I do that since years, and I train users to do so. I'm a certified onyx-technician. If you want two different cut modes in one job, you need a cut contour for every mode, set two different named colors as the contour color (with the common Prefix...

Onyx will not separate different cutting paths by layer, but by colour. When you have a valid cuth path, you have coloured the path with a color named „CutContour“, right? Now, for the flexcut path, you need to use a different named spot colour, for example „CutContourFlex“. It is important to...

S-Class wont Support FlexMarks, it support OPOS-Marks only.

The issue is that due to corona a lot of delivery lines break down. We are Mimaki-Dealer in Germany and have problems with some special inks/ink colours depending on where their origin is. Could be your problem too.

It will work with caldera directly, caldera will serve the files for the Summa Cutter ... EXCEPT you have a Summa Cutter with OPOS-CAM. OPOS-CAM needs driver software integrated in Summa Cutter Control (Windows only) to work. And OPOS-CAM needs a USB-Connection, will not work over Network. Have...

The ICC-Profiler is Standard to Postershop since a few years only (I think since v18), v12 is an older version and do not have it. Thrive is regularly equipped with the ICC-Profiler, except version 211.

Flexi 8 is not approved for Windows 10. With using Flexi 8, you risk things of this kind with every little system Upgrade. It wont help to surpress one update only. I work for a dealer, and we sell Gerber Omega too. While only Omega since 5.0 is approved for Windows 10, older versions have...

There are a lot of different Roland 540 models: do you mean a Hifijet FJ 540, a Soljet SC540, a Versacamm SP540V, a SP540i, VP540, VP540i, VS540, VS540i, Soljet XC540, VG540, VG2-540 .., Depending of the age and model, a „Roland 540“ can be both ... a good or bad choice.

If the production Manager works, Flexi too, but the connection between them fails, as a workaround you could select Menu "Edit - Preferences", point on tab "Tools" and select the Icon "RIP and Print" (or Cut/Plot depending on the version you have). There de-select the default value "Connect to...

In german language, there is a phrase „waking up sleeping dogs“, what means that repairing some things could lead to trouble with other things which are near to a damage.

They could.

There is an additional ink available from Mimaki, the ES3-ink. ES3 is a little bit more expensive than the SS21, and you wont get Orange and Light Black for it, but it should not smell as strong as the SS21.

What Ink do you use? SS21 or ES3?

If printing a file which contains cut contour data and a contour cutter is set, Thrive will separate the contour data automatically and will forward them to the Thrive CutServer. Depending on the version, it is needed to forward the cutting data by "plotting" it to a file, and let Summa Cutter...