Search results

Might also check to see if your carriage is still tight on the track it slides across. If it is loose it would cause cutting issues.

Looks like it could be useful. I was setting some heat shrink on tail light wiring under a box truck today using a torch. Heater gun would have been less scary and most likely safer but was too far from power. Can't wait for Moze to show us his Dewalt Cordless Espresso Machine. He buys all the...

Seems like they are really messy eaters if they have to get butter and chocolate off their signage on a regular basis.

Good deal. Isn't it around 3am over there right now? Almost time to get up and get to work.......

Looks like you have some lint or banner fuzz stuck to the underside of the head. Need to remove cover on the left end and check with a light Clean around the edges of the print head(don't swab the nozzles) with a cleaning swab soaked in cleaning solution. Also clean the 2 plastic ramps on either...

Those drawings will definitely qualify as a No Fly Zone up to at least 18,000 ft.

Even an import truck with a cab over rack can haul long materials. Our 92 Toyota is on it's second set of last legs but we regularly move 16'-20' material & signs on the rack. Also made a box we can throw up on top for materials we want to keep dry on the road. Built the rack out of 2 galvanized...

So that's not Bob Villa?

Welp, there goes my plan to spring my multi-level marking scheme on you guys.

Think that is the wrong kind of fish.

Using the Rube Goldberg approach > set the text in points > zoom the screen level to 100% > use a metric steel rule against the monitor > convert the mm result to inches > adjust text size from there,

I dunno Johnny I think I would be more worried about hardware over software if I lived in Venezuela. How hard I would have to look & where I might find something to eat.

Grilled, fried or baked?

I'd imagine you will need something with a pretty good UV blocker on top. No telling how long solvent ink is going to hold up before it turns George Hamilton golden brown. People still use these things?

Maybe it has something to do with all 3 of us being located below the equator in the Southern Hemisphere - Coriolis effect and all.

I am not familiar with Caldera so I can't be of any real help but when I am running sheets and it is cutting from the back to the leading edge I will flip the material and change the orientation in the cutting window to cut upside down. It then goes from the front to the back. Also when using...

What cutting software are you using to drive the plotter?

Something I had not considered - maybe there is an anti-graffiti treatment on that glass. If it is a film it seems it would be too thick not to notice and his letters would be sliding off, but if it is a coating maybe not...

You should have yelled back: "Can't!" - "just do it'™ belongs to Nike™

We're in an odd place but have had pretty good luck with them. We get stuff faster (& way cheaper) than either UPS or Fedex when we order out of the midwest. Have more issues if it is coming from the west coast (think prop 65 requires them to taste test our ink to make sure it will not cause...