Search results

there is two MDO' One for concrete forms etc and another for signs. The concrete style will have voids.. Usually cheaper in price and you spend time filling voids. By the way. If one sees voids at the edges there are certainly voids inside. And those voids will cause a failure... One day one...

Its not reading the cartridges. BAd contact somewhere.. If in fact the chips works. Why not get at least an XP computer. Win 2000 is ancient history.

The driver for your cutter is on nearly every cutter software website out there. Go look and you will find. Even Cocut has their list of drivers for the hundreds of cutters on their website free to every one who wants to get them. Google reveals a host of websites with all kinds of info on...

I use the bridge method and love it. IT takes a fe minutes to set up . but its works great when done.

google is your friend

Take them chips off. It will not work with those chips on them. Only use the cecoder chip on the main board.

the original cartridges by encad would die if sat to long. I use the chinese cartridges and they work great. Never seem to quit.. Always fire right up. I get them from ebay for about 7 bux each..

did you resset the nvram?

You have to cover the chip contacts on the cartridges.. Or, remove those little chips from the cartridges. As you mentioed above you said you didi that.. The next is to be sure all the copper points on the decoder chip and the training cable are touching in place. Other than that is...

would love to go. But cannot miss three days of work. Would have to leave wed to get there for thurs. morning start time.

maybe st has a vault full of the old books and are making a nice lick.

there are dozens of job tracking titles out there for multiple other industries. Some of them are very mature with all the bugs and challenges long worked out. For example.. A machine shop / job shop building custom machines uses the exact same data as a sign shop where the only differences is...

I just got signlab print and cut 9.1 for $750 bux.. I would watch the Signlab site a lot because they could / likely run that special again.

Not hardly.. But most are sick of working behind some guy hacking away in his basement forcing full timers to redo failed low balled work. Most full time shops left retail vinyl cutting anyway. And finally.. Real Estate signs? Good luck with that. I personally visited the local MLS...

the corona technique/heat technique. Slightly changes the plastic molecular structure so adhesives will stick. Use it on dumpters, trash carts etc.

I used to do no work or quotes for any realtor. It was always an ordeal and often our quotes were used as a billing line for a project they had in mind.

laws are interpreted different every where even within the same state. What goes on in PA will not fly in other places. An example of another law concerning a stop payment on a check. Stop payment can only be used when there is a failure of one party to deliver on an agreement. For...

Nope.. Certain conditions must be met. Simply sending a check PIF in tiny writing will not work. The PIFC must be conspicious in plain view.. There's a legal maxim saying "the law favors a compromise," and that thought is the pedestal of a PIFC. But the statute quoted above begins by...

There is not enough liquid in the ink surface to make that much gas. Its all a myth. The amount of liquid applied is just .01 of a mili liter amounts. Take one drop of of each color ink which is about the amount of ink laid down in a sq ft and spread it with a finger and see how far it goes...

They will steal this idea and charge us hundreds for it on the new printers..