Search results

Hey everyone, I purchased a sample roll of this, so I can tell you a little experience with it. The holographics is excellent, but printing is a little weird. Unprinted areas and light colors look amazing, medium colors show some reflection about 50% and areas printed in black do not reflect...

So the plotter works fine, bought a bunch of brand new blades, blade holder and putting in a new cutting strip on it. It's very different than my Roland but a lot stronger cut, it actually cut through car magnets. It has the ARMS for contour cutting, etc. It can cut directly from Corel Draw...

To chime in on this. When I purchased a laminator I messed up my first half dozen prints. Then after that I was getting about 3 out of 5. It took about a year before I got it down to 100% success rate. Because I didn't know the tension had to be 100% perfect or else it could screw everything up...

The service manual is on there too.

The only X-8 problem I've ever had was the drag and drop crash.

Took me about 5 seconds on Google. Roland Care Service & Support | Roland Owner / User Manual

So you aren't a sign company at all?

Why scrap it? I am so confused about that

You are correct.

I've done some of those, yes it's the vista systems.

I have an employee handbook that all new employees read and sign. My state is a "At will" state so I don't have to give a reason. I provide a couple verbal warnings, then a written final warning and then termination. Which at the time of the termination I give them a termination letter and sign it.

Both had several misconducts, but one was mainly let go due to being very rude and demanding with customers and giving wrong information. The others main thing was he was untrainable, super lazy soaking up the time clock and I had to tell him several times the same thing before he understood.

Exactly, I kept them on way too long.

Yesterday I had to fire two employees, my receptionist and one of my fabricators. I do not feel good about firing people and still feel lousy today about it. One of them had the most nasty attitude about it but I had to stay calm and try to be nice the whole time.Just kind of depresses you and...

Hmm... I would suggest flushing the lines and starting with new ones and see what happens. Maybe it's not reading the cartridge or air in the line? Also completely reset the settings back to factory and see if that solves it.

As a backup you can always get it repaired here: VUTEk UltraVu 2600, 3360, 2360, 5300, 3300, 5330, 150 Printhead Reconditioning Service - SERV0101

It's the blade holder, soon as I replaced mine, it worked perfectly. But also make sure your cutting strip is good too.

VHB doesn't bond to PVC so beware of that. If you screw 1/2" into the PVC and also glue it in, that will give it double support and be better. Stand offs is the way to go.

Check out nextdayflyers.com I swear by them.

I heard about one that can pick up sheets, place it on the table, print on it, take it off the table and stack it. I heard it's $1,800,000