Search results

Are you sure it's a sticker? It looks screen printed to me, but I cannot recall what Rolands have... Once you get the new cable, print yourself one. ;)

Are you SURE that the vinyl isn't defective? Or that static isn't putting itsy-bitsy pieces of lint/etc on the actual vinyl surface? You would have to have a loupe or a digital camera with macro setting to determine that.

If you hit "home" before you started printing then you can change the color order in the GSPplot. Go back to the home and just let it send the colors starting with the black and whichever were left to still print. The black should just lay down a double-coat of black on its areas, but that...

I don't seen an email coming through? my email there is jf@gorillamaker.com Call the number listed (859-918-9900) and you can speak directly to the designer/developer of the printer and he will be able to answer any questions you have or provide a sample print from your file. (I am leaving to go...

I am a bit partial to the GorillaMaker 3D500. http://gorillamaker.com/product/gm3d500-professional-series-3d-printer/

we laminate all of our printed 3m reflective with 3m 8519 unless customer-specified for gloss.

Tim, I cannot find a supplier at all for these, can you PM me their contact info? We have one here that needs inks and bulbs but can't find them AT ALL.

If lifting / adjusting the wedge doesn't do it, it could also be a broken gear on the motor that turns the "lifting rod". I had that happen recently here and saw that the gear had cracked and wasn't stuck on the drive shaft anymore allowing the blade to lift/drop at incorrect times.

Wow, a lot cheaper than we pay for 1080. I'll be talking with our rep also!

We manufacture 3D printers and do printing/prototyping. We should have our own line of filaments available soon, but working on getting all of our printer parts/products online and filling orders is a lot of work.

http://www.microcenter.com/category/4294898923/3D-Printers-and-Accessories It is the "Inland Brand" here that we like to use and has always been the most reliable filament. We do not like to use the Makerbot filament even though it is reliable; mostly for the price, but also because it is...

Right now most filaments are coming from overseas and the quality control really isn't in place yet, also "the big players" you would expect aren't even in place yet in this field; especially in the filaments arena. Just look at all of the new filament types being released and tested currently...

Do the double-strike and laminate it also. It will look good. We do it for bus shelters.

It depends a LOT on which 3d printer you own and also which type of filaments you are looking at purchasing. Are you printing PLA/ABS/etc? There is a FB group called 3D Printer DIY that may prove helpful to you: https://www.facebook.com/groups/386484504786227/ I will have our purchasing agent...

Yes, that is the option you need to select.

I would be interested! PM me with what you need to get for it. We have two here and run them every day.

Sounds like the magenta head is out of alignment. Are you getting good test prints? Was the capping station dirty over the weekend? I have had issues with a dirty head/capping station staying connected while sitting over the weekend. We always try to make Thursday or Friday the day of weekly...

Good news! After you replace that black head your prints will be perfect again! Bad news - I think that is a fatal problem I see...

This was a used truck, so I didn't have a way to get to the original drawings. ;)

John Deere Gator / Side-By-Side Wrap Template. Artwork at 100%. Verify that your vehicle is the same with a few simple measurements and then this template should get you where you need to be! ***See Fred's post below for the PDf attachment. I think I broke the forum...