Search results

If it looks perfect from 10 feet away - it's perfect.

Sounds like Avery 1005EZ would work well for you. We don't do a ton of wraps anymore but we have hundreds of vehicles/trailers floating around and most were done with 1005 with very few issues. Very user friendly vinyl in my opinion.

clear mask can be problematic, I would use the cheapest stuff that works well at transferring the graphics. The medium-tack R tapes and Transfer Rite stuff works great on Orafol 3651 with any laminate I've ever used.(mostly Oracal, Kapco, and General Formulations). If I know a noob will be...

Horrible how? points aren't quite matching up? vinyl is moving left or right? any decent plotter should be able to track 15'. See if your pinch rollers have tensioners that could be adjusted, maybe you have one side set to low, or high. A little more info would help.

I think you would be surprised at how well they scale up, most of the fills tile seamlessly and print very nice.

Yes they do, and thanks to this thread a cease and desist is likely in the making.

Weird...seems like that site no longer exists.

Try laying it while being very light with the squeegee, once its down flat squeegee as usual.

I would walleye fish every stinking day if I could. I fish Saginaw Bay, and both Bay De Nocs every chance I get, which is not nearly often enough. I really want to try Bay of Quinte one of these years.

Ok, Ok, take it easy. I now feel like I need to pre-qualify the use of the word 'awesome', but this boat is a '96 and spent every spring, summer, fall docked....dock rash is an understatement. I spent 15 to 20 hours doing surface prep to get it smooth and clean. Anyhow, I dug it out of it's...

You definately want to laminate, it will last much longer and install a little easier. I did my aluminum fishing boat last year, and it turned out awesome. Make sure it is spotless clean, wipe THOROUGHLY with isopropyl alcohol, then when you think it is clean wipe it down again. Start at the...

I am running 10.5.1 and SC30670 shows in my list.

Yes, it works fine with Flexi 10 and Cloud.

A black Sharpie pen will fix that up in a jiffy.

Cold outside, warm glass....condensation seems like a real possibility.

"The new brown facemask represents the strength and toughness of Cleveland." What?

This post may help you... http://www.signs101.com/forums/showthread.php?78948-Any-networking-options-for-Graphtec-plotters

Static is the first thing that came to mind. If it were me, I would take a piece of laminated scrap vinyl and tape it to the clear until you can connect to the take-up. Good Luck.

If by light pointer you mean A.R.M.S then yes it will.(most of the time) Watch for the media buckling slightly while cutting, if it is your cuts will be off. Cut as slow as possible and a good blade is a must. Good Luck

I'm pretty sure your plotter should not be connected in any way to your PC while installing drivers, at least Graphtecs. Upon further review....see attached.