Search results

http://www.konicaminolta.com/inkjethead/products/inkjethead/index.html

You will find Windows 7-compatible software at the summa website. Try Summa Cutter Control (installed through Summa Cutter Tools) to connectto the cutter and try to operate it. The blocks and messages are correct except that it takes 20 minutes until booting (perhaps you have meant 20 secs?).

It is a known problem with this generation of roland machines: as soon as you connect devices through a parallel cable which are not grounded (specially little printservers and notebook computers with no ground wire on power supply), the pump motor makes bad noise, but won't work. If...

You would not have that trouble with OPOS X, with a SummaCut D140R, if you know how to calibrate it.

I doesn't understand what you have meant. Have you disconnected the parallel printer cable (or parallel printserver) from the printer? The cable outside, at the back of the printer? Have you tried THEN to do a cleaning or so to check the pump?

Does the pump motor "scream" when trying to rotate the pump? Does the pump rotates when the parallel cable (or specially parallel printserver) is disconnected from the printer? With spending 1'500 Euro you should have exceeded the value of the printer itself.

I know things of this kind when the head cable is not properly connected. If the cables where new, it could be a problem of a printhead connector or something of this kind.

Yes, the RJ4100 uses waterbased ink. I don't think that this printer can be converted in a way that it is worth the money.

It's not so easy to see. You could check (if you know how) to have a look at the cap top directly after a cleaning ... if there is still ink in it, you should replace the cap top. The cap tops are consumables and are suggested to be replaced once a year, so if your cap tops are older than this I...

You need to check your Cap Tops an ink pumps. Sometimes, if cleaning don't work efficient enough (mostly because of problems in Cap ink tube or pump), when ink stayed in the cap/pump-system after cleaning, there will be an effect that could suck your complete ink system empty overnight into the...

In Switzerland, the only ink suggested from 3M is HP Latex. The recommendation for any solvent is "should work, but ...".

Often that virus protection applications identify regular files or regular action of installers as viruses or attacks. I had that problem before for years with one or two virus protectors ( don't remember) and Flexi installations. Mostly ot is suggested to turn virus apps off before installing...

Yes, SummaCut can do barcode ... if the RIP-Software supports it.

The guaranteed repeatability of the S-Class is 12m for a media width of up to 760mm ... SummaCut 8m only. And there is a possibility to add a motorized take-up-units which can be used when doing internal panelling for example. The name of the system is OPOS, Optical POsitioning System, not...

With the S2, you would have a lot of things the SummaCut don't offer: Big screen with shortcuts to all important functionality from the home screen (instead of scrolling through a menu), e. g. speed, pressure, user configuration, origin etc. 8 free nameable user configurations (instead of 4...

I would suggest to check not only the printers IP-Adress and the setting in PM. Check the computers IP too if it is still in the same subnet. Sometimes a DHCP-Server reconfiguration (because of different reasons) can lead to this kind of problem. If the IP at the PC is ok, try to "ping" the...

It have one. But it's differently arranged in comparison to the 540V. You will find it when opening the top cover of the printer. It is arranged horizontally, and guided by a metal band. I don't know where to download a SP540i service manual.

Have you done a firmware-upgrade on your printer shortly? This could be a problem too, newer firmware versions save serial numbers of cartridge chips and compare them with serial numbers of new ones. So "taking out the cartridges and pulling them back again" won't work anymore.

I would not agree. With the HP, you do not need to care for feed adjustment, if the media runs straight or not, head- or bidirectional print adjustment and so on. And most of the consumables are easy to replace from the user itself,as the printheads too.

Itis possible to buy the loading tool separately. Withoutit, it will be hard to load very soft media.