Search results

I tried Eric already, too big of a piece of crap to start with.

Dayshift bump. Was able to get a better digital picture, but still not good enough. This will be a digital print so I don't have to cut vinyl it. Well drilling was a better search term than I was using so thanks OP, that got me a few, but no cigar. No luck on the stock photo sites. Anybody...

Looking for this clipart. Checked expressclipart.com and every other site I could think of. Any help would be appreciated.

Better, definitively better. Still there though at 30-35-50 settings. Is it possible I goofed a profile setting where my RGB black (0-0-0) is printing only 100% K when it should be the 5-5-5-100 that vinylink0331 mentioned? I can't find where to adjust that.

There are waves in the material that run in the same direction and location as the light spots I've been getting. Too much heat? I've haven't changed those settings since I got the machine. Time of year? Material getting colder over night and then heated up during the printing process? Three...

Too bad I don't have any cotton swabs or pieces of paper around here.. RIPing a file now. Sent it at the 1440 though and it got me to thinking, maybe it's the slower feed rate keeping the material flatter and printing better, not the amount of ink. I'll have to send a file at the 720 setting...

Temperatures in the printer menu match what I set them at and the material looks flat going through the pinch rollers from the back. I haven't read anything about pulling the ink cartridges and running a few cycles with the cleaning cartridges in, might that help to clean out anything slowing...

We are up above Prescott by about 15 minutes in Chino Valley, a tech free zone evidently. I'm getting by with the 1440 setting, but if need be, I can load the thing and bring it down to Phoenix for service. I've printed the bearing raceway bulletin and will order the required grease and do a...

I haven't messed with the color profiles. At least, not intentionally.. I have had the issue with other colors in the past, but mainly black. Right now if I have large areas of black, I am running at a 1440 profile. No large areas of black I can often get by at the 720. Temps are 43 on the...

Well, best I can do for now is to up the profile to 1440 from 720. :/

Doug, you are correct, the lines do run in the direction of media travel. Could it be something as simple as dirty pinch rollers contaminating the media? I'll give those a good clean next. Attached is a picture of the paper towel trick in the waste ink tray after a single strong cleaning.

I don't know about a nozzle issue? I run a nozzle check daily and they're usually perfect. If I'm missing a few, they clear right up with a normal cleaning and print solid all the way across. The dried ink worms in the pump lines sounds like a likely place to try start, is there a standard...

I tried to give all the needed info, new I'd miss a few things! Palette test looks good, but I don't have an old one to compare it too. I've attached a picture. The nozzle test was interesting. I checked it before the job pictured above and it was perfect, after the job and palette test...

We've had our 1204 for over a year with very little maintenance or cleaning. Running OEM ink and never had a problem, runs like a top. Until recently, we're having some light ink coverage, mainly in the black. See picture. Looks like starvation to me, but would appreciate some direction in what...

Actually, Chris bought the router for me!

Did you see all those highway banners?$?$?$?!

I'd change your wording from "shop policy". People hate policies and if you only tell them it is your shop policy, they could balk. http://www.mo1call.com/ - looks like you can't even plant flowers in your garden without calling in Missouri, if that is the Springfield you hail from.

Need to find a source for a manufacturer for the attached sign to match existing signage throughout the facility. In case the picture doesn't show, it has the braille at the bottom and the white lettering is raised. Overall size is 3¾ x 9 inches. Thanks in advance.

Hmmm, different boxes. Maybe from different facilities.

Remembered reading Bob's post and couldn't remember what the fix was. Quick search saved my sanity for the afternoon. Thanks!