Search results

All the cool kids already have it wayne k guam usa

Probably misdirected, most likely looking for some missing state department email or something

1. Head height should be set to high for most banner material, check to see if it is (should be an orange lever right on the head carriage). 2. What are your heat settings for the banner? You may have to turn them down a little to keep the banner from tunneling when it heats up (Cheap banner...

Most of the pros will tell you to go vertical but I don't see anything wrong with horizontal - especially if you can gang the left & right lower panel sections into a single run through the printer. wayne k guam usa

Was it still under warranty? wayne k guam usa

Sounds like good support. Did you order the second one medium rare instead of flame broiled? wayne k guam usa

Looking for some real world use info on this: http://www.alumigraphics.com/cart/pc/home.asp I have a customer wanting to do a promo at a gas station, marking one of the lanes on the concrete pad in front of the pumps. Don't think it will run very long - maybe a month or two. Wondering if...

J, perhaps if he was supporting another leading candidate the rear window might have been wiped completely clean with the logo nowhere to be found......

Its the fonts man....... https://www.youtube.com/watch?v=DIujke_cLxc wayne k guam usa

I've done something similar to that but it involved a club, a pole, low lighting & dollar bills, can't remember if I had a sign on me or not..... wayne k guam usa

Take a look at the shape builder tool (depending on what version of Illy you have) It is similar to the pathfinder tool but more visual and easier to use. Select your oval and copy to the clipboard. Select your 2 lines and oval - click the shape builder tool (shift M). Hold the alt key and...

First I would do 99% of wrap design in Illy (or Draw) not in Photoshop Second your DPI is too high. 300 is not needed for something that is 22 feet long. Depending on what you are doing I'd keep it at 100dpi or less (production size). My Win 7 system is 64bit i7 with just 9gigs of ram and a...

An easier way has been posted up here a few times. Using the 12"x12" known object in your image -> draw a rectangle over it. Mask the image using the box you just drew. Scale the box up (lock the aspect ratio) to the real size 12"x12" size. Unmask the image -> it will be the correct (full)...

Thanks Fred & support team for the reboot. wayne k guam usa

You are all forgetting the feeding of the 5,000 with just 2 fish and 5 loaves of bread at a rock concert long long ago. The price per meal per person fed had to be well below the local retail cost..... wayne k guam usa

Around here we used to call the Addie(s) but not so much any more..... wayne k guam usa

Good looking upgrade :thumb:

if you are going to stick with solvent you might want to keep your eye out for the next Mutoh promo. Every quarter or so they put out a trade-in/upgrade offer that can go as high as $6k off when purchasing the 64" value jet. As long as the trade-in is 30" or larger they don't care what brand...

I think you are out of luck with the ce6000, I don't think it has the perf cutting options like the FC models. The only way to cut through the backing without ruining your cutting strip/blade is to use a carrier sheet /sled. I used some scrap Duratrans with with my vinyl taped on top. Cut all...

Sad stuff Fred. Good to read that you are on the mend with a new member of the family. wayne k guam usa