Search results

I was surprised at how many parts fit both the Mutoh and Roland printers.

Just because they don't list it, don't mean they can't get it. They can all drop ship from Mutoh. Give them a call or e-mail. Can't hurt to ask.

The head contamination is mostly from not using it enough to clear the area around the separate colors of other colors in the cleaning station. A printer that is under used is going to give you a lot of problems.

Welcome. Don't be afraid of using ink up. It will be more expensive to replace parts if it is not used enough to keep things from drying out. Line up some jobs that you can start printing before you get the machine even if you have to do some stuff in hopes of selling it. You could also plan...

Welcome from OK, USA

:Welcome: to :signs101: from OK

Good idea!

I agree! The customer does not need to know HOW you do it. He does need to know WHAT you can do. He also needs to have something that makes him feel anxious to contact you and get it started. Consider this a good exercise for helping your clients advertise their products. A good ad for your...

If you see air in the line above the damper right after you pull ink up to it, you have an air leak. Never tighten the brass nuts with a wrench. The extra torque can crack the threads.

This assumption is not correct. The siphon is towards the cartridges. If you were to pull the damper loose from the ink line, the ink flows back to the cartridges. The pumps pull the ink into the dampers where it is held from flowing back to the cartridges. The heads also hold some ink in a...

I restored the heads of a Mutoh that had been setting for over 2 years. The cleaning gets tough after a couple of weeks of not using it so it is best to run it through a cleaning cycle once a day. The problem with low usage is that ink will start to accumulate in the waste tubes and plug up...

Well Ken, This is the new member forum so, I take it that this is a new member showing off his wet application procedure.

Aw come on now. The doctor couldn't get the elephant to stick out it's tung so he had to look at it from a different angle.

Welcome from OK :bushmill: Hope this holds ya over till quiting time.

Have not got the black on the Mutoh back to 100% yet. Did get the roland SolJet pro II sj740 back to very near 100% on all 6 colors. We estimate that the printers have been setting between 2 and 3 years. The dampers were pretty much dried up in both machines. We want to set up 3 printers...

Welcome from OK.

Good luck!

Welcome from OK.

That's just wishful thinking. I'm seeing more shops go to strait printing. It is so much easier and less expensive to keep one color (white) vinyl on hand and print whatever color that is needed. No weeding or masking for the most part. Just think of all the investment you have in all those...

That is what the person said that recommended 651 to me. He even had problems with it. But it was what he used and he is satisfied with it. That don't make it a good product. The big problems with Oracal surfaced with the use of the Big Squeegee. If cut vinyl don't let go of the liner very...