Search results

If you asked nicely someone might offer to send you the Windows driver for that machine, this driver would allow you to print/cut directly out of Corel Draw or Adobe Illustrator. Keep in mind the newest driver available would only go as far as XP. Also unless you recieved User Manuals with the...

Are you sure you've got the correct ink carts? EcoSol Max

What is that maybe 2'x8' print on calendered vinyl stuck to gatorfoam with a rough outline cut for $425? Damn, I'm movin to PA.

Approximately ... 1 hour design time - 75.00 Tailgate wrap - 175.00 ______________________ Total - $250.00

$225 - $250 15 years ago ... So $90 today with a price per square foot mindset?

What troubles me is that the designer nor the customer probably see any difference between the two, I most definetly do.

When Production Manager opens to the General Tab/Screen it is right between the material settings and position settings. At least that's where it is on my old 6.5 version.

I'm not printing to an Edge but I do use Flexi to run a thermal resin printer. I have had this happen in Production Manager a few times, somehow on it's own it changes the default setting of "Send Now" to "Hold in List", check to see if this has happened. You can also check Production Manager's...

Your profile states that you have Flexi, Flexi has engravers fonts.

There is a reason why "Portable Printers" do not exist.

Breezed Caps appears to be it with a slant (oblique). Cannot locate without the slant.

Anyone Recognize This As A Font?

Why not open the file and open Design Editor, this should show you what objects the file contains. It would appear that within your shadow you used interpolate colors feature on an inline/outline.

I use a Monoject 20ml syringe, kinda overkill but its the smallest one the feed store had and provides a very strong draw.

I always do this with the sub power turned off, havn't turned off the main power ever. You don't want to pump air into the lines, you attach the ink line to the tip of the syringe and draw the plunger back to pull ink through dampers,heads & capping stations, if there is no resistance when you...

This should work fine, do one line at a time and draw just until you start to get ink in the syringe (no need to waste a lot of ink). Sometimes this causes a bit of ink cross contamination in the dampers (ie - black in cyan or magenta in yellow) but all you have to do is print some specific ink...

You just need to pull some ink through the heads & capping stations using a syringe. Pull lines off at the Y fitting going to the pump (if your just pulling air then manually move the print head carriage slightly left or right, you will feel when the head gets a good seal on the capping...

My Graphtec FC4100-75 has worked flawlessly for the past 13+ years and still works fine but yesterday when I went to cut some vinyl everytime the carriage moves to the right there is a click click click click noise as it is moving. Does anyone know what might be causing this? Figure I would take...

If I were in your position I would take a look at Graphtec's CE Series cutters.

The 100K probably covered all the customization/molestation that was done to that poor camaro.