Search results

Any merchant members offering sign cabinets? Looking for either a 4'x3' single sided or 5'x4' single sided. The sign will be hanging. Flourecent lighting. We'll print the sign face.

please post a link to the video.

Welcome from 3 ft. away... I'm his business partner and brother.

not sure i understand why with a taped hem you would roll them ink out? we use powertape and roll them ink in are we supposed to put the powertape on the ink side of the banner?

we are two weeks into our 3rd year and have been in a 36' x 28' (1008 sq. ft) building that used to be a maintenance 3bay garage. we (my partner and I) gutted the place and took out 2 of 3 overhead doors and with a little paint and floor epoxy turned it into our shop. at first the place was huge...

nevermind, just read the explanation in the first post... That looks like the media isn't in there square, prefeed it and if it tracks to the left like that then feed back to the middle and adjust the media to the left a bit. I assume you did that so yea maybe these other guys are right, maybe...

In the second pic you posted why is only half the pinch roller on the media? I have never tried to cut anything with the pinch rollers like that but maybe that is part of the problem. When we get 15" punched vinyl we always put the pinch roller just inside of the punches.

yea maybe I will try this... the laminator is a royal sovereign

Alright this has happened a few times now and I figure why not ask to see if we are doing something wrong. While mounting a print on a 8'x2' piece of polymetal (acm) we line up the print check measurements make sure everything is square, then lay down some 4" mask on the leading edge to stop...

is the chain carrier the big black belt linkage that carries the ink lines?

the only time we've moved the print head manually was when changing cap tops. Thought we had to go into service mode to lower the capping station in order to be able to move the print heads. Is there another way to lower the capping station so the print heads can be moved. Does moving the...

I have a request for 55 52"x96" table cloths that I am looking to sub out. The layout would be a logo centered on white background and a border around the peremiter. Are any merchant members offering this? post or pm me if you are interested. Thanks,

knock knock...

bump. Please if you are bored this morning watch the video I linked above and help me diagnose the knocking sound our printer is making.

http://youtu.be/ngriWPyrmB4 Here is a link to a video of the knocking sound I have been talking about for anyone who is reading this. Thanks

Thats what i plan on doing, but would like to know more about this knocking sound. Such as is this a symptom of more problems to come, or an isolated issue. I know it is hard to say especially since we don't even know what the problem is yet. So I'd like to know if this is an issue that...

^ lol

I have a request for 55 52"x96" table cloths that I am looking to sub out. The layout would be a logo centered on white background and a border around the peremiter. Are any merchant members offering this? post or pm me if you are interested. Thanks,

the 2 year factory waranty is going to expire next month on our xj 540. The cost to extend it 1 year is $2,800. We havent had any problems with our printer untill recently. In the past month or so we occasionaly hear a knocking sound when the carriage goes all the way to the left while...

That's a good idea to check for the ghosting. So ghost off won't harm the plastic, good to know. Thanks