Search results

You have to make a sure you hear high frequency noize when the printhead goes from maintenance station and stay a little under spitting box. If no noize - printhead is not working. And you have to check all few fuses around head drivers one more time.

For first time it will be scary a little. Because many possibilities to damage some parts. So, my steps... Remove top cover and top plastic covers on sides. Release the tension of steel belt on left pulley Open steel belt on both sides of carriage. Move left opened edge of steel belt to left...

What’s the problem? Just replace bearings for new set. Any what you want. Chinese or other. Lifetime will depends on bearings quality. All 8 pcs are same.

It was bought from a dealer. It is in pricelist of 2016 year. As I told, it not available anymore. Laast years I bougnt generic bearings from SKF, NSK or EZO. Actually, Mutoh told they bearings was polished outside for prevent to damage roller strip.

For 1604/1614 it was possible to buy complete set of bearings. The article for order was KY-14620. I am not sure if it available for order now. For new models is possible to buy complete carriage or bottom arm with bearings.

On Mutoh ValueJet is impossible to downgrade the firmware. Any versions. Unlock is a good solution for fix any smart cards problem.

I can't imagine you have all nozzles on the printhead if you have that printout. Add please picture of nozzle check. From service mode will be better. Big drops - because your printhead has missalignment while print. It can be wrong step adjust or printhead align.

VJ1204 has 128 Mb SODIMM memory Also, you can try to print via USB port. For check network communication chip.

Try to read that: https://dropmefiles.com/SbV7T

You can run the printer with default IP 192.168.1.253 address if you don't know actual IP. It is possible while start up. Than you can change to other IP as you want.

Do you use OEM ink? Where is filled up? Single-use cartridges? Check the distance from head to media. It looks your printer head too high.

Wrong. Hold <Left>,<Right>,<Down> together while power on.

It maybe short cirquit inside the head because of ink leakage. Check head fuses on mainboard. Especially F2 fuse.

It means the priner is swithed to longstore or cleaning mode. For fix it you have to go in diagnostic menu and change working mode parameter to correct one.

Try to excahnge Magenta ink lines on dampers inlet with some other ink channel. And make a Little Charge. You will see is it printhead (damper) problem or ink lines.

Also you can try to change rasterizing process. To ErrorDiffusion. It may help.

Try to go in menu Setup - InkStatus. And check each cartridge separately recognison.

Agree with Solventinkjet. You can recognize the button is works if you hear the beep when insert or remove the cartridge.

After reset you have to calibrate media sensor. Just go to diagnostic menu into Adjustment submenu. And run first item Media Rear/Edge calibration. It is automatic procedure. Just follow requests from the printer.

What is version of Flexi? And what is Windows version? Because it issuable old version Flexi does not work on newest Win.