Search results

What size cutter would you be looking for?

Something caused the motor to jam and it has shorted out your motherboard. You will need to find out what caused the jam of the Y motor and replace the motherboard. We service Graphtec cutters and can help you with this.

It is either PF Adjustment or the print head is not calibrated or is not in the printer level.

My uncle is a Deputy Police Chief in the town I live in and he is recommending that I get a gun and a license to carry it. It is a sad truth about the times we live in.

There has been another shooting, this time in NYC near the empire state building. Suspect is confirmed dead but no word on how many are wounded. http://www.myfoxny.com/story/19363141/shooting-outside-empire-state-building

If you are doing a head wash then you will need 4 cleaning cartridges with chips on them and they will need to be full.

Are the levers on the back of the pinch rollers set to the same tension? I believe that down is high pressure, try setting then both to this position and see how it tracks.

My girlfriend just got 12.7s by herself. I could barely beat the 15 second mark.

Check your firewall. If it is on you will need to make an exception for the VSM.

If you still need them we have them in stock and can ship it tomorrow.

We have seen a couple of demos on the design end of it and it looked good. I have yet to see the software output. When we were speaking to SAi about it they seemed to want to start slowly and get the software into high production shops or shops with multiple output devices that are having...

The inks work out to about $0.11 per square foot and the UV bulbs are rated for arround 500 hours and cost $125 each.

I have been told a number but I want to confirm with the manufacturer before I post it.. I will get back to you shortly.

Time permitted a little more printing and testing of the Flora printer today. Attached is a picture of our ceiling tile that we have just finished printing on.

PM sent

We should be getting some back on trade within the next two weeks. We will follow up with you on Monday after we talk to the current owners. We are located in Wharton, NJ 34 miles from the NJ - PA boarder on Rt. 80.

Well it has been a very sucessful day today with the Flora. The electrician got the 220 line installed arround noon and we were up and printing by 4:30. I know this is a low quality cell phone picture but attached is one of the first prints off of the unit on a Maxtor external hard drive.

Yes the printer is CMYKLcLm + White and Varnish and yes you can print full bleed on 4x8 boards. The unit can also print on materials up to 4" thick as well. There is also an optional roll to roll attachment that gives you the ability to print on roll stock up to 98" wide as well. There is a lot...

It depends on the options that you select, such as # of heads or the roll to roll option. The base unit starts arround $92,500.

Graphic Resource Systems has received our demo Flora 2512UV 4'x8' UV Printer. Below are some specs on the printer: 8-16 Konica Minolta print heads (CMYK, Lc, Lm, White, & Varnish) Highly versatile machine with the ability to print on just about any substrate or rigid material Printing...