• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Acrylic board moved on cnc is it still salvageable?

    That is why I cut mine with a laser to many recuts when I use the CNC router
  3.

    Vcarve cuts are cutting too deep

    It looks like you have the cut depth set at .25 inch that wiuld cut all the way through

  4. Tape Mount Acrylic Lettering

    When I use the pounce pattern After I install I use a makeup brush to clean the powder off.

  5. CNC Routing Clear Acrylic

    But check out the price.

  6. Question Which Laser Should I Buy?

    You should not keep laser tubes as they are easy to get from several different suppliers quickly. Also not true about the 80% if the power supply is adjusted correct You just have to know the max milliamps the tube can handle. A good Reci tube can last for years.

  7. Question Which Laser Should I Buy?

    For just cutting any laser is OK. The Trotec is the fastest for engraving but the same speed as any Chinese laser of the same power.

  8. Suggestions Glueing PVC Letters to PVC Backer

    I inlay my letters and use PVC glue easy to do and perfect register

  9. Question Face Sheields

    I would if I knew where to get the material.

  10. LDF spoil board

    I use 3/4 Trupan LDF I get it from Allegheny plywood They have a place in Pittsburgh I payed about $30 a sheet

  11. WalMart Install 10x8 mural for $240 fair?

    Remember you have travel time prep time cleanup and may have to install in the middle of the night. will 1 lift be enough for the job or will you need 2.

  12. Brazing aluminum

    Take a welding course and get a small welder you won't need a very big one to do the job

  13. Enroute, Vcarve Pro, or Aspire

    I would download the working demo of either Vcarve pro or Aspire and try it out. If you do go the Vcarve route remember that you can upgrade to Aspire and just pay the difference. Also if you do upgrade all your old files will still run through Aspire. Vectric doesn't bug you and their forum...

  14. McMaster-Carr - this one might be a record

    It's real nice having one 30 miles away

  15. Router bit longevity???

    If you are only getting 1 to 2 sheets I would check runout on the router. You may need a better chuck and collet someting like Precise bits make

  16. build it myself CNC

    Check out the Centroid Acorn controller. That is what I am going to go with as it is an bases on their industrial controller and easy to set up.
  17.

    Question Shapeoko benchtop CNC. Anyone else using this?

    It will work with any Vectric software as I see them on the Vectric page. I have seen some nice 3d cuts that were made on them also.

  18. Friday giggles

    You must be talking about Bucyrus. Loved it when I installed the signs in the CVS there during the bratwurst festival

  19. CNC / Laser cut pieces needed

    I could get 6 out out of a 4 x 8 sheet here is a dfx of the shape

  20. We're in the market for an articulating boom lift but...

    I would check rental places. Around here they sell their equipment after just a couple years and the stuff is well maintained

  21. CNC or Laser?

    I have both and the CNC router used more then the laser.
Top