Search results

While it does have lots of bells and whistles, my card is not cluttered and the contact info is very clear and readable. It retains simplicity and adds a texture that engages additional senses when you hand it to someone.

I have some fancy cards from silk cards. Pretty similar setup to what you ordered i imagine, double stack, die cut, foil & spot uv. They are great, and people always notice them when i hand it to them. they take an extra couple seconds to ask about them and give them a good look over, which...

also you should be able to butt seam any frosted without the risk of shrinking, this allows for a visibly seamless install on large panels.

What was your technique for the install? Did you try to do it dry? Frosted films are almost exclusively wet install. I would think that would keep you from getting bubbles where you have the premask overlapping.

The hp can sit idle for long periods, if you lose a head they are around $100 to replace. ink costs will vary depending on the pass mode you are running, a 750ml cartridge of oem ink will run you between $110-$130/cartridge which is the same as a 400ml cartridge of eco solvent. Nearly twice...

3M general purpose adhesive cleaner, part #08987 in the red aerosol can, common in autobody shops, works great. http://www.tcpglobal.com/autobodydepot/images/MMM8987.jpg

Is there any type of benchmarking for what the tension should be? Or, is it just an adjustment until it pulls the same tension all the way across?

I have a gbc titan 1064 cold laminator, it is about 5 years old, and in the last 4-6 months it has begun walking heavily in one direction. the prints will walk from the left to the right Approx 2-3" in an 8ft run. Upon removing the ends of the machine i see there are some pressure adjustment...

Nice!!!

http://www.flexisign10.com/icc-profiles

Two people working in tandem should be able to clean a single van in less than an hour. Bumper to bumper, wrap ready cleaning, no question.

I have done second surface cover ups with Avery 1005, it was on the vehicles for about 3 months and came off clean as a whistle.

Thank you.

A handful, any help is appreciated.

Yes.

I scrape with a razor blade then spray and squeegee with alcohol. Works great, and fast.

we get these alot. Just price it as you would for installation only. Not a big deal, some people just like to buy their own kits or they have previously messed one up and need a professional to install them.

that sounds like a solid decision.

:roflmao:

I find the detail in the tire to be extremely distracting, maybe tone down the highlight a bit.