Search results

Oracal 290GF is what you want to use. its optically clear and has the best price point @ .77. Clear Focus Clear lam is .30 cheaper but its horrible. CF its a polyester so its hard and brittle so it creases easily and the adhesion is crappy. Also, you cant hit it with heat or else it will...

its calendared not cast.

displays2go.com

Oraguard 215DU is almost $500 a roll.

haha. so many wrongs here. I highly suspect this wont be a repeat customer so butt cut it then use a q-tip to clean the finger prints in the holes and move on.

we have 3M IJ8624/8524 in stock.

dang and i had all those beaver pelts saved up. lol.

no we do it the normal way. print then lam with dry erase lam. you can get a 24"x10yrd roll for $105 at fellers. dont always believe what a sales rep tells you.

1. your cutting with too much pressure. You should not see it gouge the paper like that. 2. looks like your blade or media is shifting while cutting. Check the blade holder and make sure it is seated properly. Check the roller clamps and make sure they are all the way down. 3. check the blade...

Could it be that you are not cleaning the coro to remove the release agent? You should be cleaning the coro with MPC cleaner 6428SP.

Most crisp images? We're running Ricoh Gen5 heads. Our belt bed is also vacuum. I can print 2 - 4x8 sheets at the same time and also I can continuously feed an entire carton. As the board is exiting we wipe down and load the next board right behind it. Hybrids have come a long way.

unless he has some equipment you need its not worth it. you can do a zip code mailout to your area letting them know you are now the area leader in printing. I have seen other businesses failing - sell to another person and the business continues to fail. It was failing because of REALLY bad...

RTAPE EZ Erase - EZ Erase Dry Erase Vinyl available at fellers.com

set up a kiosk in the corner with a computer and printer/scanner. try it out. if it gets too cumbersome shut it down.

haha Gino Knows Best.

Profiling. Short of that if the grey is a CMYK grey then pull some of the MAGENTA out of it. On the screen it might look greenish or blueish but the output will be fine. Do a test print.

Nice one. We use the empty roll cores to do the same thing but with no handle. I'm sure the handle helps with leverage to turn.

depends on usage. indoors maybe you don't need the cast vinyl. there is a case for cast use indoors. if you have a multi colored cut vinyl job were you are stacking 3 colors. The cast vinyl is thinner so when you overlay the edge underneath is not as noticeable.

We have a hybrid flat bed CET Q5-1000H. Someone mentioned you can do a lot more with a true flatbed? really like what? We print 4x8 sheets all day long. We print 126" x 244" banners all day long.

Troll Status ACHIEVED.