Search results

Convex has a laminate called Stubble. I have used it before for anit-slip.

Thanks Arlo.

Can anyone tell me where is the best place to get blades for a Cutawl? I also need to know what blades with what materials, coroplast, foamboard, PVC. I could also use a instruction maunal for a K10. I just picked one up on ebay but I have never used one so any advice you can give would be...

+1 for Wild West. He does great work and has a fast turnaround.

You should be able to get them from Flexi's site.

Done. Good luck.

Liked. www.facebook.com/finishlinesigns

Thanks everyone. Great now I have to reinstall Comic Sans.

Can anyone help identify both fonts for this. I havent' been able to find them in my stuff. Thanks Stuart

Can't wait to get them!

What did you use to pump the fluid? I have been using a sonic cleaner and syringes to clean mine and it does pretty good but would love to be able to get a pump to push the fluid through the head.

Heat only made the adhesive gummy and harder to pull the vinyl off. The adhesive still stays on the trailer. I guess it will long week with the Rapid Remover, not sure how much patience I will have though. GP- I am thankful that this is only a 5 x 8 trailer and not something larger.

Anyone ever have 3951RA/290 leave all the adhesive on what it's on. This is on a trailer that I own, we wraped it almost 2 years ago. We started removing it today and the vinyl is leaving every bit of the adhesive on the trailer. The back of the vinyl is almost perfectly clean. We have most of...

I don't know about this new ink but you can use value jet cartridges in the Falcon Jr printer. All you have to do is remove the chrome decal from the old cartridges and put them on the value jet cartridges. I have been using value jet cartridges since all the ink problems began with the falcons...

I would use a bracket like this or something similar. You can make your own or flatten the one in the link to fit your aluminum. Bolt it solid to your sign and let the sign swing from the bracket so there is no wear on the aluminum.

When I get this message I alway have to shut my printer down, unplug the print SEH print server from the printer, unplug the power and ethernet cable from the SEH server. Then plug the power back in to the server, then the ethernet cable, then plug the server back into the printer, and then turn...

If the was sitting for a while before you brought it back I would definitely replace the dampers. You may also want to change the cap station. I use a file that I created using 1" blocks the width of my vinyl with the color set at 100% for that color. I use one block for each color, 6 in your...

Your black test print looks good so I thinks the spots in the black text are someting else. It only looks like one head is missing nozzles. I would try soaking the head to see if you can get some of the nozzles back.

Wrap the mug with application tape. use a spacer and a pencil laid on the table. spin the mug drawing a line on the tranfer paper. Remove the transfer paper in one peice and put it on a peice of paper then scan it. From this you can determine the arc you must do your layout on. I had to do...

I would also recomend calling Casey at Signburst.com. He is great to work with and his systems are awesome. They are cost more that you could build one for or buy one at a box store but they are night and day difference in what Casey give you. I was hesitent at spending the money but I have had...