• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    GX-540 tips and enable 'Extend' Cutting

    What version is your firmware?

  3. Solaris Inks Anyone?

    We were with Solaris but ran into supply issues and moved to STS. We offer it for the jv3 and 33 in 440 carts and bulk liters. Good stuff. References available.
  4.

    Roland SP300V printhead alignment way too far

    Glad to help out Dario.

  5. sp300v pump unit

    Very well could have been a clogged captop/hose... I have also seen the hose/tube come disconnected from the bottom of the captop on most third-party caps therefore causing a leak.

  6. Roland GX-500 cropmark error

    After updating your VW, did you reinitialize the software?

  7. sp300v pump unit

    Take off the front covers and take a look. With a flashlight, you should be able to see if and where it is leaking. Post a picture or two here for all to see and I bet you will get plenty of assistance. Even this late on the East Coast.
  8.

    Roland SP300V printhead alignment way too far

    Looking for another 30" or plan on going bigger? Give me a call or shoot me and email when you are ready to buy. Office 678-735-3200
  9.

    Roland SP300V printhead alignment way too far

    Was this test print the Horizontal Test Print from SERVICE MODE or Regular Enduser Menu? Service Code 0107 is Linear Encoder Unsetup... (Encoder needs to be set up) Calibrations: Linear Encoder Setup Print Adjust>Horizontal & Bi-Directional Print/Cut Adjust Most cases I have seen where...

  10. flexisign 10 starter-->??

    Create an account here and download from the manufacturer for free: http://www.flexisign10.com

  11. Just want to say thanks to SAi!

    In this case, Steph was able to generate a new password for the key in question.... Something dealers can not do. Steph is a good gal. Glad she was able to help you. Marty isn't such a bad guy either :toasting:

  12. Roland Color Issue - Panels printing different colors than original

    Good question.... not sure exactly but after a bit you might see a dry line after resuming your print.

  13. Worst fonts ever!

    always hated Mistral
  14.

    colored streaks/stripes in grey design - 540v

    Have you tried exporting the file to TIFF and then output?

  15. Roland Color Issue - Panels printing different colors than original

    What version of Versaworks?

  16. Icc color profiles for a Rockhopper outdoor Jr

    Got 40 MB of them for you.... PM Sent

  17. were to find pinup girl to put on race car

    vectorstock.com maybe? Did not locate one on ExpressClipart.com or would have recommended that one.
  18.

    Linear calibration Roland VP540?

    You need a tech. Head alignments... Bias/vertical/horizontal/bi-directional and more......

  19. Service call message?

    the google search is for a MOTOR ERROR, not a SERVICE CALL Service Call 0008 relates to mainboard and servo board not communicating properly.

  20. Service call message?

    Give me a call if you have time. 678-735-3200.

  21. Simple question about tax id's

    They need a resale certificate or sales tax exemption certificate. If that is not legit and on file at your office and you get audited, you are responsible for paying the sales tax plus penalties. A Tax ID aka EIN# is simply a number used by the IRS to identify the business. To be 100%...
Top