• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. BN-20 now with White Ink

    The new units will allow up to 19.4 sqft per hour output, white ink option instead of metallic or CMMYK, Free Productivity pack with media and 5 cartridges of ink AND a 6 month extended warranty totaling 12 months full coverage. Give me a shout if you have any questions.

  3. Generic Eco-solvent ink feedback

    What Roland unit/model do you have?

  4. Bobby @ CiberSupply come thru for me

    Glad to hear the 5 minute phone call to modify your Roland GX-500 was worth it to you. Hope the EXTENDed cutting area helps you out. Keep me posted in the future.

  5. SP 300V Carraige diconnect issue

    Encoder, Cut carriage cable, servo board.... any of these three

  6. Transfer Tape leaving sticky residue on the decal

    Possibly an old roll of tape? The Maintape 775 will also do this if it gets old. The adhesive will become a bit gooey.

  7. Light whining noise on sp-300

    Full history report is available from Service Mode Only, or Peck Utility

  8. Supplier For Roll Lables

    Stouse.com

  9. Sj-740

    Awesome printer.... Needing new heads you will probably need new dampers and captops as well. The PRO II units gave great output quality. $1500 plus new heads, dampers, captops ---- maybe $6200 or get a little cheaper with 3rd party parts. I would expect you to have a total of $7000 to...

  10. Light whining noise on sp-300

    Yes it is. Rated for 2000 hours as you mention.

  11. Light whining noise on sp-300

    Print the History Report. The MOTOR HOURS S is what I am referring to.... This the Scan Motor

  12. Light whining noise on sp-300

    Is that the (SCAN) ?

  13. Light whining noise on sp-300

    In User Mode, MENU>REPORTS>HISTORY> either print or scroll through the list

  14. Light whining noise on sp-300

    Have you checked the white carriage wire pulley and bearing on the left side of the machine? Pull a history report and post your motor SCAN hours here.

  15. Open house at GTS, Ackworth GA?

    The address lookups as well as Roland's dealer locator scripts are not always accurate. Example: CiberSupply is 3.5 hours (184 miles) away from you but Roland dealer locator doesn't pull us up as an option for you... CRAZY Call me if you have any questions that I may be able to assist with.

  16. CiberSupply is amazing!!!

    Not sure why are not showing up as local to Ashville..... we are only 185 miles away And I have family in Apex so it would always be a good visiting opportunity :) Let me know if I can help in any way.

  17. CiberSupply is amazing!!!

    What zipcode did you use? using 30052, here are the results: Dealer Results Products Offered CiberSupply 2890 Highway 78 East Suite E Loganville, GA 30052-3728 Bobby Fosson Phone: 877-602-4237 Fax: 678-672-6448 sales@cibersupply.com http://cibersupply.com Cutters Grand Format SOLJET Inkjets...

  18. Double Printing with the XC-540

    In Versaworks, Click on the Printer Control>General Section>Check Use Custom Settings>Set Overprint to 2

  19. Connect XC-540 directly to computer?

    +1 on the CrossOver cable. Find the IP address of your PC and then manually set the IP on the XC-540 to one digit higher in IP Range... ie: PC Addresses: IP - 192.168.1.2 NetMask - 255.255.255.0 Gateway - 0.0.0.0 XC-540 Addresses: IP - 192.168.1.3 NetMask - 255.255.255.03 Gateway - 0.0.0.0
  20.

    Roland vs 640 print quality problem after head replace

    Just curious, what was the reason for changing the head?

  21. Flexi 10 and CS5

    http://www.sign.com/pdf/
Top