Search results

Print on white Reflective gives you a little of the metallic look. We use cmyk 0, 16, 62, 25. We do print on a machine with a different ink set then yours though.

Just because they made them themselves doesn't mean it was hand cut. I make mine in house and my thumb holes are perfect every time. We use a CNC to make them.

I agree. Whoever did that most likely made it themselves. 2 -3/8" pieces of 1/16" material and then one big piece of 1/16" material.

Laser - Straight Cuts and Engraving. Going to be limited by the laser that you can afford. Will depend if your able to cut through wood and aluminum or if your only going to be able to engrave on wood and aluminum. Traditional Router - Cheaper price Point. Greater range of ability. Far more...

I would say a head issue. Probably not alignment, probably has more to do with clogged nozzles. do a printhead test and post the picture. Probably magenta head.

The material also has a better ability than standard paint to dissipate the radiation once absorbed. The material would most likely be cooler then normal paint in the sun. Black cars that don't heat up as much.

Also in order to make it the substrate it's going on has to have a melting point above 450F so vinyl is probably out of the question. A foil lined vinyl might be possible if they can put the vantablack on the foil first and then mount the foil to the vinyl. But not going to be a wrap material...

It's not even a paint job it's a process of converting a vapor into the vantablack material directly onto the substrate or object. They call it growing the vantablack on the object.

I just want to kill the guy that uploads all the dam logos in .cdr format. Whoever you are, please just convert to .pdf or .ai or .eps or anything besides a .cdr

The rollers on our graphtec slip on the silicone liner too much, so we can't cut after we weed. So we cut the vinyl, Perf .1" from the cut vinyl edge, then we weed the vinyl. 90% of the .1" strip comes off with the weeding. Then we punch the decals out. If you punch the decals without...

There are pictures where there are no issues with the kerning both with Obama and Trump in picture. Something was redone to the room and whoever reinstalled the letters messed up bad.

Neschen Monet Canvas Better white point then standard cotton blend canvas.

Biggest strawberries and bananas ever. That banana is as big as that mans bicep. Perfect.

What about sliders?

4090T and 3090T are backlit reflective materials. They are for overhead street name signs that are lit from the inside. During the day they are reflective. When the lights come on at night they show through. They do not show the color of what you put them on.

Not paying enough attention. Hadn't seen this net install stuff. Anytime i use a USB boot it's because windows stops working and I need to access the computer. This means I don't usually have internet access. But an interesting way to try different distros none the less.

I think even most linux distributions require at least a 2GB to make a bootable USB. Might not even be useful for that. and https://www.logotech.com/ from 128MB to 128GB

https://www.3m.com/3M/en_US/graphics-signage-us/resources/installer-training-testing/

Is one of the carriage rails bent? Is it possible that the carriage is actually moving lower as it travels?

That sounds normal. We have an issue where they wear down and allow the media to slip. Causing print issues and size issues.