Search results

You can flush the LC and LM lines by running cleaning solution and possibly recover them. No guarantee. Same for the metallic and white ink, except that it's almost certain that you'll have to physically replace every component of the ink delivery system for those colors. I've never done it...

I guess somebody has to carry the torch for that lame joke. :rolleyes:

Holding up the material as it feeds in and out can help alleviate some of these issues. It's not ideal, but it works (mostly).

Very clean.

Does it do the same thing if you plug it into a different outlet?

Yikes! How old is the truck and the wrap? Heating may help, but if the original wrap was done with the wrong vinyl, you could be in for a mess.

At the very minimum you'll probably have to flush the LC and LM. White and whatever metallic ink are in there are almost certainly going to require replacement of the ink systems for those colors. The odds of being able to recover them is probably pretty slim, especially if the printer has been...

That's a nice looking sign.

Looking for advice on how to make or where to buy? Relatively certain we've gotten something similar from 4over in the past.

Not even a flash of the brake lights from that box truck. Probably on the phone.

If it's heat or heat assist, make sure that works as well. Usually takes about 15-30 minutes to get up to temperature on most models.

What happened to all the preaching about leaving well enough alone from those PMs, Texas? Here you are stirring the pot after telling me to ignore people. Now you're gunning for me? Also, I like how you cherry picked quotes and then left out most of the context instead of quoting the actual...

You're not currently using the white ink for printing, or there is no white ink in the machine at all? I would imagine that as long as there is ink or a cleaning/storage solution in there, you wouldn't be able to turn off recirculation. There are a few Roland experts on these forums that might...

This is generally our philosophy too. Go as big as you reasonably can and grow into the machine, just don't overextend.

I appreciate this post and have done this very thing before. Haha!

I'd be surprised if I haven't been ignored by some members. I know that Gino and I are two sides of the same coin. I am what I am and as long as there are folks that want to try to belittle and denigrate others, I'm not going to be able to keep my mouth shut. I also think you're mostly correct...

Me. I care about having an environment where everybody feels comfortable asking questions.

No problem, I hope it works out!

Not sure about a bulk ink system, to be honest. Never looked into it. If there isn't already a 3rd party system available, there probably will be. We're still under warranty on our VG, so we haven't even looked at 3rd party parts yet. You'll probably have fewer problems with the VS and it will...

We know how it got so high: you're full of hot air and take every opportunity you get to bloviate. The fact that you're continually proving the point that I'm trying to make by personally attacking everyone is hilarious. The cognitive dissonance is staggering.