Search results

Our L25500 has been a great machine. I think they made some big changes on the 26500 so it's almost like a first model run.

Those that have the 4' x 8' bed do you wish you had the 5 x 10'?

Welcome to the group from Lancaster PA. I guess that makes me a farmer too.

Is it the flatbed vs hybrid combination that you like best? We have on old hybrid now to replace and I was set to go with a flatbed but may possibly look used printer so I can get a cutter as well. If I was going to get something used I would prefer something industrial like a Vutek.

There are a number of used QS2000's coming off lease I assume. They seem to be 2008 models so how much more life can you get out of one? Assuming you plan some Jet Pack replacements. I could get 2-QS2000's for the price of a Acuity or Arizona 460. 4 years?? Print quality is good, speed is good...

+1 on the GS6000. Ours has been a workhorse.

Looks like Onyx has a "Print Label" setting that will print all kinds of job info. Looks like if I want my web address or banner by... I can just ad it to the file name or see if there is another option to add/change text.

info on banners Do you add this to the artwork during design layout or is there an option in the rip to add a gutter image? "We print a tag with our log and contact info right into the gutter of all of our displays and banners. That way it's on the reverse side of the print, past the hem...

Thanks for that info.

I have a project requiring 85" square vacuum formed full color pan faces and need a vendor. Any recommendations? Prefer Eastern PA vendor if possible. Thanks Shawn:wavingflag:

I had same problem with FC-8000. Couldn't get it to read marks, used compressed air to blow off eye and darken marks etc with no change. Finally partially dis-assembled the cutter so I could turn the eye towards me and there was a very small piece of vinyl stuck on the eye. Couldn't see it until...

Anything more aggressive than mentioned above? We tried Mactac HTO hi-tack on a powder coated surface and need something much more aggressive.

We use all Ultraflex Jetflex and it runs well on our GS. Head height high.

+1 for Photo-tex.

I'd like to get some samples too. The Light textile doesn't print a very good black with the HP profile. Has anyone used a custom profile with better luck??

Are you guys running wide material 60" or narrow 38" for d/s banners?. We were running wide and would get buckling and 2 banners would be ruined. Always happend on second side. Also how low are you dropping temps and what vinyl have you found works best. We are running a GS6000. Thanks

I think it is a file size issue with colorburst. Never really figured out exactly what the issue was. Are you running colorburst?

Media holders BigfishDM, Do you know if the media hold down clips that come on the 26500 will fit the 25500?

Edge Holder for L25500 I see the new HP L26500 has Edge Holder clips that keep media from curling up and causing head strikes. Anyone hear if these will be available for the L25500?

The board was replaced and we are running again. Still having issues with the printer stopping in the middle of prints, especially large ones. All firmware and rip udates are done and still have that issue. The printer just stops and resets and the rip says printer not ready "Cancel Print"? We...