Search results

I can, we are in Lancaster if you still need help. Shawn 717-665-0298

+1 for Phototex very easy and forgiving to install. I would use Oracal 210 semi on the 3628 if you go that way. Sold that combination to a installer for a chain of pizza shops and it installed well and is easy to clean.

When you print all plots are your yellow patches the same yellow? One darker than the other?

Been talking with HP about one. May go to GA end of month to see it in action.

I have replaced pumps, lamps and filters on my machine. Lots you can do yourself.

I had this problem and had to have the head replaced.

Do you want to print paper posters? Our latex is great on paper but our eco-solvent not so much.

Our Oce 460 was down once in 2 and a half years for a bad pump but that was resolved in a few hours and back up and running for lunch. I am very surprised that you are having such an issue, most Oce owners I know have very few issues. I think some problems arise from under use but I don't...

Did you do alignment on that specific material? Also check for fuzz on carriage. Run test plots too. We had a new black/yellow head that was bad out of the box.

I get 1/4" particle board at Home Depot and route into it. Vacuum goes right through it.

We have used a Colex Sharpcut flatbed cutter for almost 2 years now. Great value. I would by one again.

Are you sure all air is out of you lines by purging the larger ink filters? No bubbles should come out when purging that filter, just a full stream of ink.

Most modern printers use light inks or additional colors such as orange and green. These inks result in a larger color gamut than CMYK so if you want to get the most out of your printer design in Adobe RGB. Your rip is designed to know what to do with the rgb file to convert it to print. The...

Has anyone tried printing hologram vinyl on a UV flatbed? Specifically an Oce Arizona?

We are having same issue with our GS6000 black channel. Did not pull cover to find air in line but our nozzle check looks the same as pictured in this thread. Please send link to damper change instructions. Thanks

We have the Oce 460GT and the rip was the decision maker for me. Oce has ONYX and Fuji was Colorgate. Now we have 4 printers running on ONYX Thrive in 2 buildings. That works nice for us. We have varnish as well but will probably switch to white/white soon.

Same here. Very disappointed with the quality slide with 13 oz Jetflex using latex inks. Still ok with solvent but latex has plasticizer migration issues. Looking for a good alternative.

We have a Colex installing this week. I'll post back how it goes. Regarding the router head they also have a user changeable heavier duty router head available. The machine is very solid and the tools are machined very well.

How did the second side print on the Ultraflex LTX? I am trying one of Big Fish's 18oz 2 sided on my L25500.

Which Oce do you have?