Search results

This may be a dumb question but we are doing some larger prints (12 to be exact) roughly 48" x 53" almost a rectangular shape and installing them on windows. The problem is we normally laminate them which makes it easy to install but because they are only up for a couple weeks the customer...

Probably a dumb question but I hvae a customer who sent me artwork for his trailor to be done and he created it in AI but it will not let me import the EPS file. It just loads and then nothing comes up on the screen. Also my other concern is that he sent me the AI file as well and though it...

I couldn't find the correct place to list this but I am looking for this font below. It is the one that says Mane Cinsations. If anyone knows it would be great thanks.

Below is a picture of a print I did and there seems to be color fading in and out of it. You have to look close but you can see it go light and dark and on and on. There are new caps, pumps, and nozzles are all good. Any idea of what it can be? I didn't know if the encoder strip can play a...

I've got an EPS file a customer sent me and when I go to print it the things prints absolutely great. The red in it is much better then my red so I'm wondering if there is a way to somehow save the red in imported file and that way I can use it on my color chart?

My Mimaki CG 130FX is messing up when it goes to cut. When I send a contour cut through Flexi it will cut the shape out perfectly but it is scoring the entire print while going back and forth. I adjusted the blade up and made sure the blade was clean but it is still doing it. Please let me...

Current problem I am running into is whenever I print vinyl or gloss banner the material wants to wrinkle. I have done everything with heat. Turned it down as low as 31/31 and high as 50 and still can't get it to go away. Is there a way to get this to stop. When I am printing large swatches...

So today I recieved an email from Signwarehouse about a mutoh 64" printer being on sale for only $15,500. Great deal and I've been looking to upgrade so of course I called and inquired. What really struck me though was they proceeded to tell me there 440 cartridge is $129 and the cost of ink...

Hey there I have a JV3 130spII and whenever I print a large color of anything med to dark my print will fade some and then go back t onormal printing. Just yesterday I was printing a blue car about 7' long and 2/3 way through the blue just kinda faded and then after another foot or so came...

Issue while printing on my jv3. Whenever I print starting last night about 5ish everything is getting a 1/16" of an inch yellow to the left of the print. I thought maybe heads were dirty or something but its not the case. When I print test swatches of like 20 colors everything has the same...

Hey there guys awhile back I was on here looking to print nice true reds and after alot of trial and error I finally got it down. Well of course with my luck my computer goes down I lose everything. I rebooted loaded all my layouts and so on but no color profiles that were saved. It's not a...

Hey guys I know this is probably a dumb question but how do I have cut on a Mimaki cg130-fx? I am running Flexi 8.1 and do all my rip and print from there along with contour cutting but really don't have a clue how to do the half cut. Being I have a customer wanting 1600 3" x 3" circular...

My graphtec recently went down and I'm looking to buy a used cutter that contours cuts but don't want to spend the money on a new one since I will be buying a new mimaki all in one later this year. So my question is summa sign pro d1600 any good? It's an older model but I was told it contour...

I don't know why but when I came in today after being off for a couple days and fired up the JV3 the prints are taking too long. So I noticed that the wiper was wiping way to much. But I can't figure out why it is wiping sometimes after 4 passes sometimes after 8 or 10 passes....Any help would...

Hey guys question here is I have a JV3-130SP II and out of nowhere when I run prints sometimes now it will print so much of the sign and then stop re suck ink and move roll of vinyl like 2 inches and up then restart printing. Anyone know why this would be doing this? I just ran a 4' x 10'...

Okay to start sorry to all the sticklers about where i placed this post I didn't know what forumn to pick and choose this one. Now to business. I need a 6' x 14' banner printed and shipped to me in NW Ohio by Thursday so I can inspect and ship it overnight to Atlanta for a big trade show on...

Running Flexi 8.1 and wondering about cropping shapes with pictures. I know I can go ahead and do it in AI but I try to do as much in Flexi as I can. I know this is probably a pretty simple answer but for how much I use Flexi I do not really know. Thanks in advance for the reponse

I know this is an old question but after looking for hours I have yet to find an answer. I have a Mimaki JV3 130SPII and am trying to figure out what my ink cost roughly is. I'm thinking of lowering a couple prices since the competition insists on lowballing everyone and don't want to burn...

Had a customer come in and place an order for 24 sets of 12" x 24" magnetic full color. I went to order in the magnetic and print 3651 as usual and apply but I was wondering your opinions on the printable magnetic. It would be nice to print directly and just trim instead of printing vinyl...

Have a JV3 130SPII with which I use nazdar inks in and recently noticed light banding in all colors. I am using orajet 3164 on 720x720 mode in bi directional and on 35 degrees pre and post heat. I have tried in uni directional as well. Never really had an issue and when I do nozzle wash and...