Search results

Is this PVC free product from HP an adhesive backed material or is it a glue pasted material that needs water to activate? Many installer hesitate to work with pre-pasted wall paper material.

Ya, the first one is easy...but couldn't seems to find those other one. I even contacted that company in Australia, but they won't reply...guess is top secret! Thanks guys!

Hi guys, Wonder if any one can identify these mesh banner? I crop this out from another print provider website from Australia, wonder if these mesh is available in North America, best if its in Canada, if not I can import from US. Cheers!

don't have the cash for it yet. Depending on which OCE or CET model you are getting, most like your productivity (4x8 sheet per hour) will be higher than the Mimaki one. The Mimaki is rated at 8sheet CMYK and 4sheet CMYK+CL+WH. Being said, if your configuration is CMYK+CL+WH, it is at...

No is not that, I just got it figure out. I went into menu and disabled the feed for dry, then it is all good! Hope everyone learned something here today. Thanks all!

So I tried, now the last thing to figure out is the margin between panels. Do you guys realize that the print/graphic will automatically roll down past the heater once it is finished. Which I believe is a new setting the versa works has (after updating last year). I never had that a year ago...

Yes, I just try, it is too dumb to do over 250. Thanks a lot Pat, this will allow me to sleep in the night and not needing to baby sit it!

Thanks Pat, that's actually new to me and good to know. But what I also need is to bring the roll off, laminate the full roll and then back for cutting. So when we do 2,000pc of decal, I wonder if I can batch 50up in a panel for example, set it with Crop Marks (Print&Cut Alignment), continuous...

Hi guys, Wondering if any one know if this is possible. We have a bunch of print cut to do with lamination. Our panels will be around 48" long, and wondering if there's a way to set up the printer so that the printer will print the next panels (same panels) automatically and without wasting 12...

Thanks for the info! What do you think the consumption of power on the 280? Does it eat more than the L360 with 2 single phase 240W? I'm lucky my uncle is an electrician and I'm sure he can put it in for me at cost almost but do have to double check if I can get the 3 phase needed. On the...

Hi Guys, Anyone can give us some comment about the two printers. We are looking to purchase a third printer, but cannot wrap around our head which one we would like to go with, moreover, we have never own a HP latex printer, the current two are Roland. L360 - new generation, seems better...

heck...it went up to $143 in BC last week.... while the fuel cost went down, the ink price went up...

I think polyester film is optically clear, and more stable in terms of shrinkage? Correct me if I am wrong.

How long have your coat of epoxy paint last you until you want to repaint it now? We don't do much car wrap, but since we will have the space now, we MIGHT, but I might get G-Floor for the car wrap bay, maybe like a 8x18 size. I am guessing it should last quite good if the rest of the area is...

Any permanent double sided mounting tape. We get a log of 50" roll and pre-mount 4x8 sheets of 030 polystyrene. Then cut out whatever size you need.

We're not doing cleaning, but packing soon. Will be moving to a new shop! For those who have your floor treatment. What color did you go with? Was it epoxy coated or just concrete floor paint? I am looking to paint the floor white, but 9 out of 10 people say no because it gets dirty easily...

Moving shop in end of Jan, and we also placed an order on the rollsover today! I think the rollsover build is the best, and the most important thing is no gantry on top of the roller. Very excited! What size did most of you out there purchase?

Here's what we do CMYK mirror print (print direct or polyester film) Mount a white 030 Polystyrene Polish edge. Epoxy glue for a 1/2" White PVC Cleat set. We never did any black vinyl as there will not be any light on the wall it hangs on anyway. Plus the 030 Polystyrene block most light out...

Tested one of this at the SGIA, yes I must say this is an awesome piece of tools. We were looking at the 55" x 156" table. My dad doesn't do any lamination nor premask etc. but he was able to mount a printed vinyl with no lamination onto a PVC after looking at the demo the sale rep did right...

It should be a new setting for the latest VersaWorks. The print will now automatically advance beyond the heater, so that if you left the print there after printing and did not remove it immediately, no parts of your print will be on the post heater and potentially create a color difference...