• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

angle

  1. Lord Adhesive failure, any advice?

    I was gluing 2" aluminum angle to acm to make returns. Used Lord's 406/19 (not expired). Lightly scuffed the angle and wiped it with ispropyl. Same for the acm. Squeezed out a mixing nozzle's worth first to ensure full mix. Clamped for 24 hours. Today I went to move the sign and the pieces...
  2. XC-540 Soljet III capping station lists/tilts to one side when rising.. okay? adjust?

    Hey! I was recently performing a height adjustment to the capping station and I noticed something weird that bothers me. The capping station has a slight (but noticable) tilt to it, that changes direction depending on the direction of travel. When moving down, it tilts slightly to the right...
  3. Veloster Windshield Curve (Bottom)

    Does anyone have the curvature angle for the BOTTOM of a Veloster windshield for a vinyl banner? I don't have the car, but am going to be making a few banners and want them to follow the curve as best as possible. Thank you in advance for any help.
  4. Font ID please

    Does anybody know this font? best picture I have, it's on a bit of an angle. Thanks,
  5. Graphtec FC8600 Edges not lining up and corner flairs

    I have a Graphtex FC8600-160 and am having a couple issues. When i cut things for some reason the start and stop point have just a minor offset from each other. The edges of some triangles and corners seem to have a slight flair to them. they are not just 90 degree angle cuts when they need to...
  6. Need Help Measure a sign that is on an angle

    How do I get an exact measurement of a sign if the photo was taken on an angle. I am using Flexi SignPro 8.6 v2. Unfortunately I do not have Photo Shop or any other programs to assist me in this. I thank anyone who can help.
  7. Blade questions to cut vinyl

    Hi all, I'm from Cape Town and new here. Awesome forum! I used to have a Roland VP-540 and now I own a Mimaki CJV-30-130BS printer / cutter 1. What blade angle to use for what purpose? There are - 30 degree - 45 degree and - 60 degree 2. I have some Roland ZEC-U5022 blades...
Top