cut

I really don't understand what is causing this issue, I am trying to cut out a file with ONYX Rip which ive done many times before. This time the cut lines look all jumbled when it opens in the rip. I have had something similar before and just tried things like Expanding in AI / Outline etc. but...

Our cutter has recently started to skip complete shapes when cutting jobs which includes several smaller elements. This has been going on now for a few weeks, and we have not been able to find out why. Our vendor has not been able to help with this, and Summa technical support in EU are on...

Hello guys, so i usually charge as a sqft when i cut letters and stuffs on vinyl, but when 1 sqft is completely filled with letters/shapes charging the same amount as 1sqft that contains a few cuts doesn't make sense. So how do you generally charge in this type of job. Im currently using...

Greetings all. We've recently added flat bed cutting permissions to Onyx to give us the ability to tile long mural runs and cut on our Colex Sharpcut. Works exactly as we had hoped. My question is the Onyx barcode and what we need in order to scan at our Colex and automate our process even...

Hi guys, I recently bought a used Graphtec CE3000-120 but I can't find a functioning software solution for Mac. Do you know of any software that will make this beast cut, and preferably contour-cut from a Mac? Any help appreciated. Best regards, Ricki

We just purchased a Summa St2140. We are trying to cut the 3-6mil vinyl with 10 mil laminate and eventually 6mil/15mil combo for 21mil thick cut for offroad stuff. We tried multiple test runs and can't seem to cut through both the laminate and the vinyl. We can't seem to get the Summa dialed...

We have an old but very great Roland SolJet XC-540. There's a spot on the printer about about 12" in. Whenever the carriage passes over this spot, the blade toggles up and down a couple times. It isn't dragging over the print or messing up the ink while printing, but it goes up and down, so...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

For some time now I have had a problem with my HP Latex 54 cutter tracking going off the line sporadically on the Y axis while cutting. I have been unable to find any correlation except that it seems to happen more on larger cuts (over 40" long or so). I will have a single sheet with many...

Is this possible? In all previous RIPs I have used there has always an option to import to trim marks / bleed / media etc... just as you would when placing or importing a file onto Ai It appears that Caldera does not have this option available, meaning all files need to be resized / placed...

Good afternoon, I have a few questions regarding the cut lines when cutting on the material in the title. I use a Versacamm SP300i with a 60 degree cutting blade. On SuperTEK clear, I get cut lines that are perforated and although it's not impossible to weed, it's a little aggravating when...

When I try to do a cut on the Valuejet 1624X Printer, It just scores the vinyl, and does not make the cut. Then comes up with a cutting error. I need to release and reset the vinyl to clear the error code. Does anyone have any idea of what I need to do to repair this. Just noticed, sorry...

I have the Mimaki CJV150-130, I print laminate and cut. Usually I have no issues. Lately every contour cut I do it's pulling and ripping my stickers! I use illustrator make a cut line save it as an eps and open it in Rasterlink. Has worked for months with no issues. Its cutting in the right...

Hey all, hopefully one of you can help me out. I was plotting on the Mimaki this morning and it looks like the blade pulled back on a large section of the vinyl and backing and got jammed. I cleared out the vinyl and wiped the blade no problem but now my pressure settings are all WAY off...

Hey this is John with Skywatch Signs, I am looking to purchase a new print and cut machine for the company. I am looking for a 60" wide machine. I would like suggestions for a high quality reasonable price machine.

Hi guys, I have a xr-640 roland 2013, single owner. My issue started when performing PerfCutContours, on the right half side of the sheet (Control Panel side) stickers where cutting at the right force. On the left side maybe 13" in some stickers where cut not with the same force. The problem...

Hi guys, I have a xr-640 roland 2013, single owner. My issue started when performing PerfCutContours, on the right half side of the sheet (Control Panel side) stickers where cutting at the right force. On the left side maybe 13" in some stickers where cut not with the same force. The problem...

We are in the Dallas/Ft Worth area and have two CJV30-130's we are looking to sale to make room for a new HP570. If interested please email Kevin at kevin@martinpaul.com for more details. Thanks!

I've been having an off and on issue with the contour cutting vinyl on our Mimaki cutter. I would send artwork through and release the job to be cut. The machine will feed the correct amount of material and then start cutting horizontal lines in a condensed area and sometimes overlapping the...

Hey all! We are currently working with our go-to tech guy, but this issue is a pretty big mystery with a lot of back and forth, so I'm just throwing it on here in case any of you have experienced this before. Our Roland 54 no longer cuts consistently from day to day and even job to job. Here's...