efi

Hi all, is anyone out there using a combo of the Fiery XF cut server application and a Graphtec cutter? We use an FC8600-130. I am printing on an EFI Pro 16H, and utilizing Command Workstation to process and RIP files for printing. I was able to install and activate the Cut Server application...

Note: The answer does not have to involve Fiery Impose. I am only looking for a way to setup double-sided 4x3 badges for printing. I realize the question is pretty specific for the software I am using but maybe the solution is in preparing the file and not the software I am using. I am printing...

Howdy y'all, Wondering if anyone else here has an EFI Pro16H or similar and has experienced this problem before? For EFI Pro16H users (or the like), do you shutdown the computer every night, or do you just let it go to sleep? I'm wondering if something is happening while the PC is sleeping...

Ok I couldn't post in the classifieds so I'll do it here: If anyone's looking for a cheap intro into flatbed printing, I've got a EFI raster flatbed that's being replaced next week. It's working BEAUTIFULLY at the moment, the problem is it's old and if I had to replace parts I'm forced to go to...

Vutek QS2000 USED parts were pulled from a working printer. We needed the room for our new printer and had to remove. All parts are in working order upon being pulled from the machine. All serial #'s are photographed and included in the photos that can be sent to you. There are a few photos...

Hello All, We currently have a Vanguard 300D. We mainly print on 5x10 coroplast and I wanted to see what settings you are using on your Vanguard. We have one row of heads on the printer. We print in 8 pass for most prints. We are going to update it to either 2 or 3 rows of heads. Right now...

Hi all, we have a used EFI Rastek H650 that we're trying to get setup. We have it physically ready, but we're having some software issues. It came with Fiery 4.5.x, that we have setup on a fresh computer running Windows 7 32-bit (yikes), but it didn't come with the H650-specific device drivers...

I am trying to narrow down the cause of my Cyan Ink fading out. I print heavy coverage on adhesive vinyl rolls (3M IJ3510-C) and am having issues with Cyan starvation. For the first 6 inches to a foot, everything looks great, then Cyan will start banding. It will get worse and worse until there...

2015 EFI H1625 Hybrid UV Printer CMYK - With 2 Channel White PRICED TO SELL! We need the space for new larger printers. This machine is a workhorse. We are only selling it because we need to move from an entry level production printer to a dedicated production level flatbed and roll-to-roll...

Hey guys! I've been working with this printer for several years now. You always have to purge the heads before printing, and while white purges just like the rest it takes a little bit more effort to get the white acceptable. Thats always been the case. However, now when purging white takes...

We upgraded to the 16H from the 1625 and have a lot of parts available including print heads and coolant pumps. Email me if interested adam@superiorsigns.biz

Does anyone have any guides or advice on how to clean off and possibly replace the media belt on a H1625 LED Printer? None of the guides provided by EFI have any information about it. we have a lot of ink build up and we are looking for the safest solution to avoid doing any damage to the printer.

I recently updated my Fiery XF rip software to 6.2.2. It erased EVERY setting! I looked all over for a settings or config file, but I had no luck. I did a Windows System Restore, but that restore the settings. I have been able to get it up and running, but I'm 100% sure I'm not using it...

Hi wonder if anyone can help. Our Efi Vutek QS2000 printer has suddenly started printing unwanted bands at the side of our prints and is happening on all material from ACM to roll to roll vinyl would appriciate if anyone could steer us in the right direction to getting this resolved. Thanks in...

hello everyone, Does anyone of you has a complete data sheet of EFI quantum LXR 3? I need to check its printing resolution with printmodes passes. I hope anyone here could help me and can provide some informations. Thank you in advance.

hello everyone, Does anyone of you has a complete data sheet of EFI quantum LXR 3? I need to check its printing resolution with printmodes passes. I hope anyone here could help me and can provide some informations. Thank you in advance.

I'm looking for a recommendation for a clear coat to use over stainless steel printed with EFI QSPro Ink from a QS2? Any material prep tips would also be appreciated. We have a company doing some printing for us with their VuTek QS2 Pro but they don't have experience printing directly on...

Good Friday to everybody!! Looking for a little assistance. We purchased a VuTek QS3200 last year and the one thing we didn't receive with the printer was a users guide. I've searched the internet numerous times and cannot locate a place to download or purchase such a guide from. I can...

Hello, We are a small sign company in the caribbean. We currently have 2 63" mimakis, 1 98" dgi vt3 printer, 1 infinity 126", 1 teckwin uv flatbed. We are having problems with our workflow because of time and are two wide-format printers being down most of the time. So we were looking into the...

Brand new EFI Rastek H652 UV ink flatbed hybrid printer for sale. I have purchased two printers from Nazdar (EFI distributor) and decided to use only one. My loss is your gain. Price includes: Full warranty Delivery Full set-up, training and support from Nazdar. You get the same service...