flexi

Compatibility with Gerber Edge is a must, Flexi preferred (but will learn Omega if that's what's available) Thanks!

Lets be honest here, Flexi sucks beyond measure. They take your money every month and do minimal updates to make their program actually work. You would hope that the software would be intuitive enough to save a pdf with the cutlines included, but alas that is not the case. Is there a...

My workflow has me using Flexi regrettably and I am trying to figure out how to send perfcuts with longer lengths. It seems that it is taking forever to get through an inch of material. We have a small kiss cut and a perf cut - the perf cut is where its going wrong. Any ideas???

I'm having a problem that started suddenly out of nowhere this morning. We have all our cutters connected to Flexi Production Manager via the network. All cutters have DHCP turned off with manually set IP/subnet/gateway. We have two FC9000-140 cutters side-by-side, both new (about 2 months old...

I've been using my Graphtec FC9000 for a few months with zero issues, recently I have been getting a few off cuts. Software: Onyx Thrive and Cut Server (Up to date) Blade: CB09UB-2 Printer: Epson R5070 Crop Marks: Inward facing L's Here is my list of problems: -Kiss cut likes to switch spots...

We are printing onto Class 2 reflective vinyl. The problem is when we try to cut it the plotter won't read the barcode. We have tried covering the barcode with matte laminate and covering the plotter to reduce any direct light reflecting off the stock. Sadly neither of these options work. Does...

Selling my Mutoh valuejet 1204 (that needs a new print head since it sat for most of this year while I was out of the country and I won’t be using it anymore) along with the vinyl express q54 cutter. Comes with computer and monitor that has Flexi and production manager. Comes with scanner as well.

Need help in trying to finalize file(s) to print our first snowmobile hood and tunnel graphics. I am at the point of needing to get this done and willing to pay set it up for nested printing within Illustrator or allow Flexi to do the nesting. The purchased template layout is too wide for the...

I’ve always used Flexi. I’d like to get some options if I should switch to Onyx and why. I’ve heard it’s the better rip but I don’t know why. I’ve tried the trial version a couple times and it doesn’t seem much different or easier to use.

Has anyone here had any issues with SAI software printing out files at a smaller size? We have a HP 365 Latex printer, use AI and Photoshop to design/edit files, then SAI Production Manager and Flexi to print them. I have noticed a while ago that prints for some reason tend to be 1/8" smaller...

Windows PC, SAI HP Flexi 21 for HP Latex 115 54 inch printer cutter combo I am stuck and so frustrated. I am trying print and install a wall mural on a 15 foot long wall. It is our first wall, so I am sure that is part of it. The customer sent an AI file 260mb and has some colors that do...

Hi, I am having an issue with my Graphtec plotter. I am trying to make 24-inch signage fit 2 jobs to the 48-inch roll to cut both signs and not waste vinyl. Unfortunately, every time I use Flexi to send the job to the plotter, it does not cut the full border on the left side. It has plenty of...

Recently I installed FLEXI22 to work with my Roland printer, and HP 64 Cutter. While trying to install and connect the HP64 cutter, first I noticed that it wasn't even connecting to the computer - drivers had to be updated which I managed to get from the SUMMA website...

So im just wondering if anyone knows a way of merging two contour cuts on production manager. For some reason my file will split it up into 2 line items and then only cut one of the 2. The machine is set up to cut both but will just cut one or the other. I attached a photo to show what I mean by...

Hello All, I am having a frustrating issue with trying to get color bars to print on either side of my sandwich print image thru Flexi. I can select the option, I can see them in the preview but they don't print on any layer. I am starting to guess that this is one of those things that is just...

I am running a new to me HP315 with less than a 1000k sqm run through it using Flexi 22 print and cut. I have been running tests to make sure it's printing the colors I need with the appropriate profile. Printed one row of decals on calendared vinyl and that came out perfect. Continued on and...

Hi! I work mainly on Illustrator, but now do contour cut stickers on flexi and an HP 64 Cutter. Is there a way to take a pre-existing vector shape in flexi and give it contour cut properties? I ask because the Contour Cut filter on flexi gives way too many anchor points, and Flexi's Reduce...

I am really stupid when it comes to tiling out jobs for walls with corners. My brain just cant think straight when there is a mural that needs to go around a corner or double back. I have learned to leave 2" bleed on all sides and to overlap corners with 2". My problem is the math, I get so...

Hello, I am 65 and have been in the sign business for 46 years. I have made all kinds of signs, managed graphic depts, create mechanical files & drawings, conduct in depth surveys, etc. I have a very large working knowledge of the business. For the past 9 years I have been a designer using...

When I print some PDF files they print but any images/pictures are not printed, totally missing. When i check the print preview they show up. What could cause this. Im using SAI flexi RIP and HP Latex 315 printer. See attached pics